US Mag 2PC U201 Standard Wheels | Road Runner Marietta GA

Back to Results

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

The U201 Standard carries a straightforward five-spoke face that doesn't try too hard — and that restraint is exactly what makes it work. The spokes are wide at the barrel and taper slightly toward the center cap, giving the face a planted, substantial look rather than a busy one. On a polished finish, the machined surfaces catch light at every angle, so the wheel reads differently in morning sun than it does under a parking lot flood. It pairs naturally with black or dark gray body paint, where the contrast does the heavy lifting, but it also holds its own against white or two-tone builds. The 11-inch width fills a fender well properly — you won't be hunting for spacers to get that flush stance on a Jeep Wrangler JL or a Dodge Durango.

Specifications

Diameter x Width	20" x 11"
Bolt Pattern	5x127
Offset	ET-51mm
Backspacing	4.00"
Hub Bore	78.30mm
Load Rating	1800 lbs
Construction	Forged
Material	Aluminum alloy
Finish	POLISHED
Manufacturer Part Number	U2012117340

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x127 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-51mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the POLISHED Finish

US Mag has been producing American-market custom wheels since the 1960s, and the two-piece forged line reflects decades of refinement in that heritage. The U201 Standard sits in their forged catalog, meaning the barrel and face start as billet aluminum before they're machined and assembled — not cast. That process translates to a stronger, lighter wheel compared to a comparable cast piece at the same diameter and width.

About US Mag 2PC

US Mag 2PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount, balance, and TPMS programming completed in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed; same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled for a 5x127 bolt pattern with a -51mm offset, which covers a broad range of vehicles including Jeep Wrangler JK and JL models, Jeep Gladiator variants, Dodge Durango trims, Jeep Grand Cherokee fitments, and several classic Chevrolet and GMC C-1500 pickups from 1988 through 1998. Always verify your specific year, model, and trim against the approved fitment list before ordering, and confirm your hub bore and brake clearance as well.

Do lug nuts come included?

Lug nuts are not included with the wheel. Because aftermarket wheels vary in seat angle and shank length, you'll want to match lug nuts to both your vehicle's thread pitch and this wheel's seat type — most US Mag two-piece forged wheels use a conical or ball seat depending on the application, so confirm that detail before purchasing hardware separately.

Can I finance a set?

Yes — financing options are available at checkout through Acima, Affirm, and Synchrony Car Care, giving you flexibility on payment terms whether you're buying a single wheel or a full set of four. Each program has its own approval process and terms, so review the options at checkout to find what works for your budget.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button