DG69 22x10 5x139.7 Satin Bronze | Road Runner Wheels

Back to Results

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

When you hold the DG69, the face reads as a multi-spoke design with enough depth to cast shadow between the spokes under direct light. It's not a busy wheel — the lines move outward from the center cap cleanly, and the spoke width gives it a solid, planted look rather than something delicate. The Satin Bronze finish does a lot of work here: it's muted enough that the form reads clearly in daylight, but the low sheen picks up warm tones at dusk or against desert pavement. It pairs naturally with earth-tone trucks — think Quicksand, Baja Yellow, or any flat gray — and holds its own against blacked-out body panels without competing with them. Lifted Tahoes, Silverados, and Tundras tend to be the sweet spot for this size and pattern.

Specifications

Diameter x Width	22" x 10"
Bolt Pattern	5x139.7
Offset	ET+25mm
Backspacing	6.48"
Hub Bore	77.80mm
Load Rating	2116 lbs
Construction	Cast
Material	Aluminum alloy
Finish	Satin Bronze
Manufacturer Part Number	DG69-22100-5550-25BR

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x139.7 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+25mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the Satin Bronze Finish

OE Wheels focuses on cast aftermarket fitments sized and offset to match factory specs across common truck and SUV platforms. Their approach prioritizes practical fitment data over novelty — the DG69 reflects that. It's not a boutique wheel, but the bolt patterns, offsets, and load ratings are dialed in for real-world use, and that consistency is worth something when you're buying a set of four.

About OE Wheels

OE Wheels produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases at our Marietta shop on Roswell Rd. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

The DG69 in 22x10 with a 5x139.7 bolt pattern and 25mm offset fits a wide range of trucks including Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tundra, and Nissan Titan — but fitment depends on your specific year, trim, and any suspension modifications. Always confirm your hub bore, existing offset, and clearance requirements before ordering.

Do lug nuts come included?

Lug nuts are not included with the wheel. You'll want to verify your vehicle's lug seat type — most GM and Toyota trucks use a different seat angle — and match the lug nut taper accordingly. We can point you to the correct hardware when you order.

Can I finance a set?

Yes — we offer financing through Acima, Affirm, and Synchrony Car Care, which gives you a few different structures depending on whether you want lease-to-own flexibility or a straightforward installment plan. Applying takes a few minutes and won't always require perfect credit. Ask us at checkout which option fits your situation best.

Fitment specs: the OE Wheels DG69 comes in 5x139.7 bolt pattern, ET+25 offset, 6.48" backspacing, 77.80mm hub bore, a 2116 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button