Finding wheels that fit your vehicle
DG69 — Satin Bronze
You save per wheel
This wheel is built to your exact spec — call (678) 400-6467 for an itemized quote. Pricing depends on the size, finish, and build options you choose.
Pay over time
*Estimated lease-to-own payment — tap an option for details. Final approval and terms are determined by the lender. See all rim financing options →
Acima
Lease-to-own — no credit needed
You can apply now, or pick this option at checkout — your choice.
Final approval and terms are determined by the lender.
This wheel is forged to order at the factory. Typical build & ship time is 6–8 weeks. You can check out now to lock in your build slot and pricing — we'll confirm the ETA after your order and keep you updated.
Drop your email and we'll let you know the moment this OE Wheels DG69 — Satin Bronze is back in stock. Or call 678-400-6467 — we can sometimes source faster.
Checking package availability…
Final package timing will be confirmed.
Call to check availability
Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.
About This Wheel
When you hold the DG69, the face reads as a multi-spoke design with enough depth to cast shadow between the spokes under direct light. It's not a busy wheel — the lines move outward from the center cap cleanly, and the spoke width gives it a solid, planted look rather than something delicate. The Satin Bronze finish does a lot of work here: it's muted enough that the form reads clearly in daylight, but the low sheen picks up warm tones at dusk or against desert pavement. It pairs naturally with earth-tone trucks — think Quicksand, Baja Yellow, or any flat gray — and holds its own against blacked-out body panels without competing with them. Lifted Tahoes, Silverados, and Tundras tend to be the sweet spot for this size and pattern.
Specifications
| Diameter x Width | 22" x 10" |
|---|---|
| Bolt Pattern | 5x139.7 |
| Offset | ET+25mm |
| Backspacing | 6.48" |
| Hub Bore | 77.80mm |
| Load Rating | 2116 lbs |
| Construction | Cast |
| Material | Aluminum alloy |
| Finish | Satin Bronze |
| Manufacturer Part Number | DG69-22100-5550-25BR |
Build Your Package
Add Matching Tires
Recommended tires for your — wheels on your vehicle
How it works
- 1 Call 678-400-6467 to confirm fitment & availability
- 2 Apply above or choose your financing option at checkout
- 3 Get approved instantly — no delay
Fitment
This wheel runs the 5x139.7 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+25mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.
About the Satin Bronze Finish
OE Wheels focuses on cast aftermarket fitments sized and offset to match factory specs across common truck and SUV platforms. Their approach prioritizes practical fitment data over novelty — the DG69 reflects that. It's not a boutique wheel, but the bolt patterns, offsets, and load ratings are dialed in for real-world use, and that consistency is worth something when you're buying a set of four.
About OE Wheels
OE Wheels produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.
Questions We Get
Will this fit my truck?
The DG69 in 22x10 with a 5x139.7 bolt pattern and 25mm offset fits a wide range of trucks including Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tundra, and Nissan Titan — but fitment depends on your specific year, trim, and any suspension modifications. Always confirm your hub bore, existing offset, and clearance requirements before ordering.
Do lug nuts come included?
Lug nuts are not included with the wheel. You'll want to verify your vehicle's lug seat type — most GM and Toyota trucks use a different seat angle — and match the lug nut taper accordingly. We can point you to the correct hardware when you order.
Fitment specs: the OE Wheels DG69 comes in 5x139.7 bolt pattern, ET+25 offset, 6.48" backspacing, 77.80mm hub bore, a 2116 lbs load rating.
Vehicles this wheel fits
- 2019–2022, 2024 Ram 1500 Classic
- 1994–2018 Ram 1500
- 2004–2009 Dodge Durango
Sizes vary by trim. Pick your vehicle above to see the exact sizes that fit yours.
Bolt pattern & hub bore by size
- Bolt pattern: 5x139.7 (5x5.5) · hub bore 77.8 mm — 22x10 ET+25
See it on your vehicle first: upload a photo of your car or truck at rims.ai and get a free AI preview of this wheel on it.
Pay over time with Affirm: see if you qualify — checking won't affect your credit score. Choose Affirm at checkout. Payment options through Affirm are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders.
Compare wheels
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.