Niche 1PC NC278 CALABRIA 6 6x135 Matte Blk 20/24" Wheels

Back to Results

Niche 1PC NC278 CALABRIA 6 — Matte Black Machined Dark Tint

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick one of these up and the first thing you notice is the tight, multi-spoke face — spokes that taper toward the barrel without going needle-thin, so the wheel reads as substantial even from a distance. The machined cuts run across the spoke faces and lip, giving the eye a change of texture to land on, while the dark tint layer over those cuts pulls the contrast back just enough that it doesn't scream for attention. Flat black body panels pair naturally, but I've also seen these sit well on white, silver, and dark green trucks where the matte field absorbs light rather than throwing it around. At 9.5 inches wide with a 30mm offset, the face sits pushed out toward the fender line — right where you want it on a half-ton build.

Specifications

Diameter x Width	20" x 9.5"
Bolt Pattern	6x135
Offset	ET+30mm
Backspacing	6.43"
Hub Bore	87.10mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	MATTE BLACK MACHINED DARK TINT
Manufacturer Part Number	NC278MT20956330

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 6x135 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+30mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the MATTE BLACK MACHINED DARK TINT Finish

Niche Road Wheels has been producing cast and flow-formed designs for the performance-fitment market for well over a decade. They're not a budget-shelf brand, but they're not priced out of reach either. Their quality control on machined finishes is consistent, and the NC278 Calabria 6 reflects that — the machined lines are clean, not ragged, which matters when you're running a two-tone finish that will expose any slop in the process.

About Niche 1PC

Niche 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled for a 6x135 bolt pattern, which is the standard for Ford F-150, Expedition, and Lincoln Navigator platforms across most recent model years. That said, offset, hub bore, and brake caliper clearance all factor into a proper fitment — bring your year, make, model, and trim into the shop and we'll verify everything before anything ships.

Do lug nuts come included?

Lug nuts are not included with the wheel. Most OEM lug nuts will not seat correctly against an aftermarket wheel's conical or radius seat, so using the right aftermarket lugs matters both for safety and for keeping the finish around the seat area from getting chewed up. We can match the correct seat style and thread pitch when you order.

Fitment specs: the Niche 1PC NC278 CALABRIA 6 comes in 6x135 bolt pattern, ET+30 offset, 6.43" backspacing, 87.10mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button