MSA Offroad M49 CREED UTV 4x110 Black 15" Wheels

Back to Results

MSA Offroad Wheels M49 CREED UTV — Black

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

When you hold the M49 CREED, the first thing you notice is how purposeful the face looks — no wasted material, no ornamental spokes thrown in for the sake of it. The face profile uses a direct, multi-spoke layout that reads bold from a distance but stays clean up close. In Black, the finish absorbs light rather than reflecting it, which gives the wheel a grounded, low-key presence on the machine. That works especially well against white, green, or sand-colored UTV bodies where contrast does the visual work. The 14-inch diameter and 7-inch width hit the sweet spot for most UTV fitments, keeping the wheel proportional rather than oversized.

Specifications

Diameter x Width	14" x 7"
Bolt Pattern	4x156
Offset	ET+10mm
Backspacing	4.39"
Hub Bore	115.10mm
Load Rating	1250 lbs
Construction	Cast
Material	Aluminum alloy
Finish	BLACK
Manufacturer Part Number	MA049MX14704410

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 4x156 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+10mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BLACK Finish

MSA Offroad Wheels has built a focused reputation in the UTV wheel segment, developing fitment-specific designs rather than adapting truck wheels to side-by-side applications. Their catalog targets real bolt patterns and backspacing ranges that actually show up in the field, which matters when you are ordering for a machine with limited clearance tolerance. It is a brand that stays in its lane and executes consistently within it.

About MSA Offroad Wheels

MSA Offroad Wheels produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my UTV?

This wheel is built around a 4x156 bolt pattern with a 10mm offset, which is a common spec for several major UTV platforms. That said, always cross-reference your machine's required backspacing and hub bore before ordering — offset alone does not tell the whole fitment story.

Do lug nuts come included?

Lug nuts are typically sold separately for aftermarket UTV wheels. You will want to confirm the correct seat type and thread pitch for your specific machine, as using the wrong lug hardware is one of the more common installation mistakes we see.

Fitment specs: the MSA Offroad Wheels M49 CREED UTV comes in 4x156 bolt pattern, ET+10 offset, 4.39" backspacing, 115.10mm hub bore, a 1250 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button