Konig 47MC Hypergram 5x114.3 Metallic Carbon Mach 18" Wheels

Back to Results

Konig 47MC Hypergram — Metallic Carbon Machined Lip

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick up a Hypergram and the first thing you notice is how little it weighs for its size — that's the flow-forming process doing its job, stretching the barrel under heat and pressure to thin the walls without introducing weakness. The face runs a tight multi-spoke pattern with deep pockets, giving the wheel visual depth that flat-face designs simply can't replicate. On this 11-inch-wide fitment, that spoke layout fans out aggressively, filling the arch on a stretched or flush tire setup. The Metallic Carbon Machined Lip finish layers a dark, metallic charcoal center against a precision-cut outer lip, so the wheel reads two-tone from across a parking lot. It pairs well with silver, gunmetal, or matte black body colors, though it also holds its own against brighter builds in white or yellow where contrast is the whole point. Sports cars and lowered FWD and RWD platforms are the natural home here.

Specifications

Diameter x Width	18" x 11"
Bolt Pattern	5x114.3
Offset	ET+40mm
Backspacing	7.58"
Hub Bore	73.10mm
Load Rating	1521 lbs
Material	Aluminum alloy
Finish	Metallic Carbon Machined Lip
Manufacturer Part Number	47MC-HG18514406

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x114.3 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+40mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the Metallic Carbon Machined Lip Finish

Konig has been producing wheels since 1995 with a consistent focus on the performance street segment. They're not a boutique brand chasing hype — they're a volume manufacturer that has refined flow-forming and casting quality over decades. The Hypergram line specifically represents their push into lightweight performance, and the fitment data behind their products is generally thorough and reliable.

About Konig

Konig produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This specific wheel is an 18x11 with a 40mm offset on a 5x114.3 bolt pattern, which is engineered for passenger cars and sport compacts rather than full-size trucks. If you're running a truck application, the offset and width combination here will almost certainly put you outside safe fitment parameters. Always cross-reference your vehicle's hub bore, offset range, and backspacing requirements before ordering.

Do lug nuts come included?

Lug nuts are not included with the wheel. Konig wheels typically use a standard conical seat, but you'll want to confirm the correct seat angle and thread pitch for your specific vehicle before purchasing hardware separately. Using the wrong seat type is one of the most common causes of wheel loosening over time, so it's worth getting this right.

Fitment specs: the Konig 47MC Hypergram comes in 5x114.3 bolt pattern, ET+40 offset, 7.58" backspacing, 73.10mm hub bore, a 1521 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button