KMC KM551 OUTRUN 6x139.7 Black Wheels

Back to Results

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick one of these up and the first thing you notice is how substantial the face feels — KMC didn't thin out the spokes trying to chase a lightweight number. The Outrun runs a multi-spoke layout with a slight forward step to the face, which gives it depth without looking cluttered. In Black, the finish absorbs direct light and returns a matte-to-satin quality depending on the angle, so it reads differently in a parking lot versus on the highway. It pairs cleanly with white, gray, and military-green body colors, and holds its own against factory rock-rail and fender-flare trim without competing for attention. A solid choice for JL Wranglers and JT Gladiators running a mild lift.

Specifications

Diameter x Width	17" x 8.5"
Bolt Pattern	5x127
Offset	ET-10mm
Backspacing	4.36"
Hub Bore	71.50mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	BLACK
Manufacturer Part Number	KM551MB17855010N

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x127 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-10mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BLACK Finish

KMC has been producing wheels since the mid-1990s and has built a reputation for consistent fitment accuracy and solid construction quality at a realistic price point. Their casting process and finish controls have tightened considerably over the past decade. They're a practical choice when you want a wheel that shows up true to spec and doesn't require a lot of hand-holding during installation.

About KMC

KMC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled 5x127, which is the native bolt pattern for Jeep Wrangler JK, JL, and Gladiator JT applications. With a -10mm offset and 8.5-inch width, most owners running a 2-inch or greater lift will see good fender clearance, but you should always confirm against your specific trim level and suspension setup before ordering.

Do lug nuts come included?

Lug nuts are not included with the wheel. Most aftermarket wheels require a conical or ball-seat lug nut depending on the seat type, so verify the correct seat style before purchasing hardware separately. We can point you toward compatible lug nuts when you're ready.

Fitment specs: the KMC KM551 OUTRUN comes in 5x127 bolt pattern, ET-10 offset, 4.36" backspacing, 71.50mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button