KMC KM542 IMPACT 5/6/8-Lug Satin Black Machined Wheels

Back to Results

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

When you hold the KM542 Impact, the first thing you notice is how the spoke structure balances mass and openness — thick enough to feel substantial, spaced wide enough to show off a brake caliper without looking busy. The face has a slightly concave profile that gives the wheel depth without going full deep-dish. On the machined sections, the cut runs clean and consistent, catching light at an angle while the satin black areas absorb it. That contrast is what makes this design work. It pairs naturally with white, silver, charcoal, and dark gray vehicles. It also reads well on red without competing with the body color. Compact trucks and mid-size SUVs are the sweet spot here.

Specifications

Diameter x Width	16" x 7"
Bolt Pattern	5x114.3
Offset	ET+30mm
Backspacing	5.18"
Hub Bore	72.56mm
Load Rating	1900 lbs
Construction	Cast
Material	Aluminum alloy
Finish	SATIN BLACK MACHINED
Manufacturer Part Number	KM54267012530

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x114.3 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+30mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the SATIN BLACK MACHINED Finish

KMC has been producing aftermarket wheels since the mid-1990s and sits under the same parent company as several other well-known aftermarket brands. Their cast lineup is engineered to meet or exceed SAE and JWL load ratings, and the KM542 is a consistent seller for good reason — the fitment data is reliable and the quality control on the finish work is solid for the price category.

About KMC

KMC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

The KM542 Impact in this configuration runs a 5x114.3 bolt pattern with a 30mm offset, which covers a wide range of Honda, Toyota, Nissan, Ford, and Hyundai applications. That said, you need to verify your specific year, make, and model against hub bore, load rating, and any trim clearance requirements before ordering — bolt pattern alone does not guarantee a safe fit.

Do lug nuts come included?

Lug nuts are not included with this wheel. You will need to match thread pitch and seat type to both your vehicle's studs and the KM542's lug seat — most aftermarket wheels use a conical or mag seat, so confirm before purchasing hardware separately.

Fitment specs: the KMC KM542 IMPACT comes in 5x114.3 bolt pattern, ET+30 offset, 5.18" backspacing, 72.56mm hub bore, a 1900 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button