Fitment

This wheel runs the 5x127 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+1mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BRONZE Finish

Fuel Wheels has been producing truck and off-road specific fitments long enough to have real data on what those vehicles actually demand from a wheel. Their flow-formed process — spinning the barrel under heat and pressure after casting — produces measurable improvements in tensile strength over a standard cast wheel without the cost of full forging. It's a practical middle ground, and Fuel applies it consistently across their 1PC lineup.

About Fuel 1PC

Fuel 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases at our Marietta shop on Roswell Rd. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled 5x127, which is the native bolt pattern on Jeep Wrangler, Gladiator, and certain Ram 1500 models. The 1mm offset keeps the face sitting close to flush with the fender — pair it with the correct hub bore adapter if your hub diameter differs, and always verify load rating against your vehicle's GVWR before mounting.

Do lug nuts come included?

Lug nuts are not included with the wheel. You'll need lug nuts that match your vehicle's thread pitch and seat type — most Jeep and Ram applications use a conical or bulge-acorn seat, but confirm before ordering. We keep a range of OEM-spec and aftermarket lug nuts in stock and can match the right hardware when you order your set.

Can I finance a set?

Yes — we offer financing through Acima, Affirm, and Synchrony Car Care, so you can spread the cost of a full set across several months. Each option has different term structures and approval criteria, and you can check eligibility without impacting your credit score on most of them. Ask us at checkout which program fits your situation best.

Fitment specs: the Fuel 1PC D800 OXIDE comes in 5x127 bolt pattern, ET+1 offset, 4.79" backspacing, 71.50mm hub bore, a 2500 lbs load rating.