Fuel 1PC D733 WARP 5x127/6x135/6x139.7 Black Wheels

Back to Results

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

The Warp lives up to its name. The face runs a series of sharp, twisted spokes that converge toward the center hub with a torqued, mechanical tension — like the wheel is already mid-rotation. When you hold one, the casting is dense and the spoke edges are cleanly defined, no soft radii softening the lines. The matte black finish keeps the face flat and uniform, which actually makes the spoke geometry read sharper in direct sunlight. It pairs well with blacked-out trucks, graphite grays, and army greens, but it holds its own on white builds too where contrast does the heavy lifting. This is a truck wheel, through and through.

Specifications

Diameter x Width	20" x 9"
Bolt Pattern	5x127
Offset	ET+1mm
Backspacing	5.04"
Hub Bore	71.50mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	BLACK
Manufacturer Part Number	D73320907550

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x127 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+1mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BLACK Finish

Fuel Wheels has been producing truck and off-road-focused fitments since 2009, building a catalog that leans heavily on bolt-on fitments for domestic trucks and Jeep platforms. Their 1PC cast line sits at the accessible end of their lineup — straightforward construction, consistent quality control, and fitments that actually show up in common sizes rather than requiring a custom order.

About Fuel 1PC

Fuel 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled 5x127, which is the standard bolt pattern for Jeep Wrangler JK and JL models as well as several Ram 1500 configurations. Always verify your specific year, make, and model against the offset and hub bore before ordering — a 1mm offset is nearly flush, so fender clearance and suspension lift both factor into the final fitment picture.

Do lug nuts come included?

Lug nuts are not included with the wheel. Fuel wheels typically use a standard conical seat, but you'll want to confirm seat type and thread pitch against your vehicle's factory spec before purchasing hardware separately. Getting that wrong is an easy mistake that causes real problems at the hub.

Fitment specs: the Fuel 1PC D733 WARP comes in 5x127 bolt pattern, ET+1 offset, 5.04" backspacing, 71.50mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button