You save per wheel
This wheel is built to your exact spec — call (678) 400-6467 for an itemized quote. Pricing depends on the size, finish, and build options you choose.
Ways to pay
Acima
Lease-to-own — no credit needed
You can apply now, or pick this option at checkout — your choice.
Final approval and terms are determined by the lender.
This wheel is forged to order at the factory. Typical build & ship time is 6–8 weeks. You can check out now to lock in your build slot and pricing — we'll confirm the ETA after your order and keep you updated.
Drop your email and we'll let you know the moment this Fuel 1PC D668 NITRO — Gunmetal is back in stock. Or call 678-400-6467 — we can sometimes source faster.
Checking package availability…
Final package timing will be confirmed.
Call to check availability
Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.
About This Wheel
Pick one of these up and the first thing you notice is how the spokes are thick at the barrel and taper toward the center cap — there's real visual weight to it, not the spindly look you get on cheaper cast wheels. The spoke faces have enough flat surface area that the Gunmetal finish reads differently depending on the light: muted and stealthy in overcast conditions, closer to a dark silver when the sun hits it straight on. That range works especially well against white, black, and military green body colors. On lifted Jeep Wranglers and JLs it fills the fender opening the way a 17-inch should — no gap, no apology.
Specifications
| Diameter x Width | 17" x 9" |
|---|---|
| Bolt Pattern | 5x127 |
| Offset | ET-12mm |
| Backspacing | 4.53" |
| Hub Bore | 71.50mm |
| Load Rating | 2500 lbs |
| Construction | Cast |
| Material | Aluminum alloy |
| Finish | GUNMETAL |
| Manufacturer Part Number | D66817907545 |
Build Your Package
Add Matching Tires
Recommended tires for your — wheels on your vehicle
How it works
- 1 Call 678-400-6467 to confirm fitment & availability
- 2 Apply above or choose your financing option at checkout
- 3 Get approved instantly — no delay
Fitment
This wheel runs the 5x127 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-12mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.
About the GUNMETAL Finish
Fuel Wheels has been a consistent presence in the truck and off-road segment for well over a decade. They produce wheels across a wide price range, and the 1PC cast line sits at their entry-to-mid tier — honest about what it is. Quality control on their cast lineup has been reliable in our experience, and replacement hardware and center caps are straightforward to source.
About Fuel 1PC
Fuel 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.
Installing at Road Runner Wheels & Tires
Mount and balance is same-day in most cases at our Marietta shop on Roswell Rd. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.
Questions We Get
Will this fit my truck?
This wheel is drilled 5x127, which is the native bolt pattern for Jeep Wrangler JK, JL, and Gladiator, as well as certain Ram 1500 configurations. The -12mm offset is on the aggressive side, so confirm your fender clearance — especially if you're running a lift and aftermarket flares — before finalizing the order.
Do lug nuts come included?
Lug nuts are not included with the wheel. You'll want to match the seat type on the D668 Nitro, which uses a standard conical seat, and verify thread pitch for your specific vehicle. We can help you select the correct set when you order.
Can I finance a set?
Yes, we offer financing options through Acima, Affirm, and Synchrony Car Care. Each program has different approval criteria and term structures, so you can choose whichever fits your situation. Apply at checkout and you'll typically get a decision quickly without a hard credit pull on some options.
Fitment specs: the Fuel 1PC D668 NITRO comes in 5x127 bolt pattern, ET-12 offset, 4.53" backspacing, 71.50mm hub bore, a 2500 lbs load rating.
Compare wheels
Save my garage
Create an account to sync your vehicles, favorite wheels, and cart across devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.