4 Inch Lift Kit | Rear Blocks | Ford Bronco 4wd (1978-1979)

Built for 1978–1979 Ford Bronco owners who want a level, aggressive stance with room for bigger tires, this 4-inch lift kit raises your front end to match the rear, delivering a flush appearance and improved ride height. You'll gain up to 35 inches of tire clearance while maintaining factory-like ride geometry through corrected caster angles and factory-spec suspension geometry.

Installed and serviced at Road Runner Wheels & Tires. Most lift kits go in the same day. Call (678) 400-6467 to schedule.

What's included

• 4-inch N3 Shock Kit — Premium nitrogen-charged shocks with 10-stage variable damping, 18mm spring-loaded piston rod, and 54mm shock body for smooth highway ride and off-road performance.
• Lifted coil springs — Front suspension springs engineered to raise ride height without sacrificing ride quality.
• 7-degree C-bushings — Corrects caster angle after lifting to maintain factory suspension geometry and steering feel.
• Track bar drop bracket — Repositions the track bar to keep front-end geometry optimized.
• 3-inch rear lift blocks — Fabricated steel blocks (stronger than cast-iron) that level the rear with your new front height.
• U-bolts and installation hardware — Everything needed to secure the rear blocks and complete the install.

Important notes

• Vehicles equipped with factory quad shocks (two shocks per front side) will use one aftermarket shock per side as part of this kit.
• A drop pitman arm is recommended for optimum turning radius and drag link alignment — the OE pitman arm will NOT work if it has a welded ball joint on the end. Rough Country drop pitman arm #6602 is available separately.
• Proper wheel backspacing is critical to fit 35-inch tires; consult with Road Runner during your quote.

Why customers pick this at Road Runner

• Rough Country Lifetime Replacement Warranty backed locally — any defect covered for life.
• Professionally installed by technicians who perform these lifts every week — your Bronco gets the attention it deserves.
• Alignment performed in-house as part of every lift install — corrected caster and geometry dialed in before you leave.
• All components tested on the same year and trim — you get the exact fit Rough Country engineered for your Bronco.

Ready to build it? Call (678) 400-6467. Hablamos Español.