1 / 2

BDS Suspension
3 Inch Lift Kit w/ Radius Arm | FOX 2.5 Coil-Over Conversion - Performance Elite | Ram 3500 (13-18) 4WD | Diesel
Part #: BDS1622PES
$5,960.65
Pay over time
*Estimated lease-to-own payment. Final approval and terms are determined by the lender. See all financing options →
Snap lease details
Built for Ram 3500 diesel owners who demand 3 inches of lift without compromising ride quality or durability. This BDS Radius Arm Lift Kit pairs a FOX 2.5 Coil-Over Conversion up front with a rear block lift, letting you run up to 35×12.5 tires while preserving your truck's geometry and driveline angles. It's the smart choice for owners who tow, haul, and want controls that feel planted on pavement and trail alike.
Installed and serviced at Road Runner Wheels & Tires. Most kits go in the same day. Call (678) 400-6467 to schedule.
What you get up front
- BDS Radius Arms — Heavy-duty units that improve articulation and leverage geometry while keeping caster angles neutral for balanced steering feel.
- FOX 2.5 Coil-Over Conversion — Replaces your factory coils with a modern independent setup tuned for both highway comfort and off-road compliance. Damping adjustability lets you dial in your ride preference.
Out back
FOX Performance Elite shocks handle the rear on a 2-inch block lift, keeping the truck stable under load and soaking up bumps on rough terrain without that clunky, disconnected feel of a traditional block-only setup.
Pick your shocks
- Rubber Bump Stop — Standard front bumpstop protection for daily driving and moderate impacts.
- FOX 2.0 Hydro Bump Stop — Hydraulic compression control that fires when you hit hard landings or big impacts, adding an extra cushion of progressive resistance without affecting normal suspension travel.
Important notes
- Maximum tire size: 35×12.5. Larger tires will contact body or suspension components.
- This kit is engineered for 2013–2018 Ram 3500 4WD diesel models without air suspension. If your truck has air-ride, confirm fitment before purchase.
- Driveshaft angle is preserved by the radius arm geometry and block-lift combination, protecting your U-joints and transfer case from stress.
- Front bumpstop selection (rubber vs. hydraulic) affects the feel under extreme compression — choose based on your duty cycle (towing, rock crawling, daily).
Why customers pick this at Road Runner
- BDS Suspension warranty backed locally — if something breaks, we handle the service.
- FOX Performance Elite components tuned by engineers who understand diesel trucks and their geometry needs.
- Corrected caster angles mean no pulling or wandering — your steering stays true even at 3 inches.
- Our install team does these conversions every week; same-day turnaround is standard.
Ready to build it? Call (678) 400-6467. Hablamos Español.
Professional Installation
Our certified technicians at Road Runner Wheels & Tires install BDS Suspension kits daily. Installation scheduling available on most kits.
- Factory-trained lift kit installers
- Torque specs verified to BDS Suspension standards
- Post-install road test and inspection
Our Location
Walk-ins welcome. Located at 1585 Roswell Rd in Marietta, GA. Easy access from I-75 and I-575.
- Mon 9 AM – 5 PM · Tue–Fri 9 AM – 5:30 PM · Sat 9 AM – 5 PM
- Hablamos Español
- Comfortable waiting area
- Complimentary vehicle inspection
BDS Suspension Warranty Coverage
Every BDS kit carries a No Fine Print lifetime warranty on all manufactured suspension components.
- Lifetime warranty on suspension parts
- Drivetrain warranty protection
- FMVSS compliant in all 50 states
- Backed by Fox Factory
Flexible Payment Options
Get your lift kit installed and pay over time. We offer multiple financing and leasing options to fit your budget.
- Acima: No credit needed, lease-to-own
- Affirm: 0% APR available
- Synchrony Car Care: 6 mo promotional
- Covers parts and labor
Ready to schedule your installation? Call us or book online.
Call (678) 400-6467| Brand | BDS Suspension |
| Product Type | Lift Kit |
| Part Number | BDS1622PES |
| Lift Height | 3 Inch |
| Category | lift kit |
| Configurations | Rubber Bump Stop FOX 2.0 Hydro Bump Stop |
| Configuration | Rubber Bump Stop, FOX 2.0 Hydro Bump Stop |
| Availability | In Stock — Built to Order |
| Shipping | Free Shipping · Continental US |
| Warranty | BDS No Fine Print Lifetime Warranty |
| Compliance | FMVSS Compliant · 50-State Legal |
Vehicle Compatibility
| Make | RAM |
| Years | 2013 — 2018 |
| Trim Levels | Big Horn, Laramie, Limited, Lone Star, SLT, Tradesman |
| Drivetrain | 4WD |
| Engine | DIESEL |
Lift Specifications
| Front Lift | 3" |
| Rear Lift | 2" |
| Front Method | Coil-Over |
| Rear Method | Block |
| Max Tire Size | 35 x 12.5 |
| Lift Category | 2-3.5" |
| Kit Type | lift kit |
Verified Fitment
- ram 3500 coil over conversions
- ram 3500 w o air ride
How it works
- 1 Order online or call 678-400-6467
- 2 Choose financing or pay in full at checkout
- 3 Professional installation at our Marietta, GA shop — typically 1–3 business days once parts are on hand
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.