Toyota Tercel Wheels

The '95 to '97 Tercel rolls on a 4x100 bolt pattern with a 54.10mm hub bore, and you've got room to run anything from 13-inch up to 15-inch diameter depending on your brake setup and how aggressive you want to go. I see these cars come in pretty regularly—compact, nimble, and honestly they take to a good wheel upgrade better than people expect. OE sizes run 155/80-13 or 175/65-14, but there's plenty of headroom if you want to plus-size without killing your speedo or fuel economy.

We stock OE-style replacements in steel and alloy, and we've got a solid selection of aftermarket options in gloss black, machined silver, and bronze finishes. For a Tercel, offset usually sits in the 35–45mm range depending on the rim width—I keep a few 14-inch and 15-inch sets on the rack because that's where most folks land. Brake clearance is straightforward on these; you're not fighting big calipers, so you've got flexibility. I'll walk you through fitment when you come in or call, make sure the spigot ring seats clean and the lug pattern is dead-on.

When your wheels get here, my crew runs them through the full process. Hub-centric fit, spigot ring check, TPMS reseat and code if needed, road-force balance on every one, and lug torque to Toyota spec. We've been doing this in-house for fifteen years right here in Marietta, and we don't cut corners. Bilingual service, walk-ins welcome—that's how we work.

We mount these for folks across Marietta and East Cobb. Financing through Synchrony starts at $199 with six months promo, or Acima lease-to-own from $50 to start. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online.