Suzuki RENO Wheels

The 2005–2008 Suzuki RENO rolls on a 4x114.3 bolt pattern with a 56.50mm hub bore, and OE sizes run 15-inch to 17-inch diameter depending on the year and trim. I've mounted a bunch of these over the years, and the main thing to watch is that hub bore — you need a spigot ring if you're going aftermarket, because a loose fit will vibrate like crazy once you're rolling.

We stock OE-style replacements in 15 and 16-inch, plus a few 17-inch upgrade options in gloss black and machined finishes. The offset range that works cleanly is usually 38 to 45mm — anything outside that and you're fighting clearance or running the tire too close to the strut. I keep a couple of staggered setups on the rack too, because a few folks like the look. Brake clearance is straightforward on these; the wheel well's forgiving enough that you don't have to overthink it.

When your RENO comes in, my crew runs a hub-centric fit check, seats the TPMS sensors fresh, road-force balances every wheel, and torques the lugs to Suzuki spec. We're bilingual, walk-ins are always welcome, and we've been doing this in-house right here in Marietta for fifteen years — no outsourcing, no guessing. I run that road-force machine on every single one because a balanced wheel makes all the difference on the road.

We mount these for folks across Marietta and East Cobb. Financing through Synchrony (6 months promo on $199+) or lease-to-own through Acima ($50 to start) if you need it. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.