Ram 5500 Wheels
Fitment by Year
The RAM 5500 rolls on a 10x225 bolt pattern with a 170.10mm hub bore and 19.5-inch rim diameter — that's the OE setup I see on every 2024 through 2027 model that comes through the bay. Stock tire size is 225/70-19.5, and I keep those specs front-of-mind because the 5500 is a workhorse that needs precision fitment, not guesswork.
When you're looking to swap wheels on a 5500, you've got options. I stock OE-style replacements in gloss black and polished finishes, plus some plus-size upgrades in 20-inch and 22-inch diameters if you want a more aggressive look without losing brake clearance. The key is offset — I run the numbers on each wheel to make sure it clears the caliper and sits flush to the hub. Hub-centric rings come standard on everything that leaves here; I don't cut corners on that fit.
Once we mount your wheels, my crew road-forces every single one, re-seats and re-codes the TPMS sensors, and torques the lugs to spec. Been doing this fifteen years in Marietta, and I can tell you the difference between a sloppy install and a dialed-in one shows up in ride quality and tire wear. We're bilingual, walk-ins are always welcome, and we do the work in-house — no outsourcing, no waiting.
We mount these for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta area. If you need financing, Synchrony Car Care runs a 6-month promo on purchases over $199, and Acima lets you lease-to-own starting at $10. Walk in at 1585 Roswell Rd, call me at 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ram 5500
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Ram 5500 wheels
What's the bolt pattern on a RAM 5500?
10x225 with a 170.10mm hub bore. That's what I see on every 2024–2027 model. OE rim diameter is 19.5 inches. If you're shopping for aftermarket wheels, those are your anchor specs.
Will those wheels fit my 2025 RAM 5500?
If they're 10x225 with a hub bore that accepts 170.10mm spigot rings, yes. I verify fitment on every wheel before it goes on the truck — I don't assume anything.
Do you install wheels same-day?
Most of the time, yeah. Depends on how busy we are, but I'll give you a straight answer when you call or walk in. Road-force balance, TPMS re-code, lug torque to spec — all done in-house.
Can I finance wheels at Road Runner?
Yes. Synchrony Car Care gives you six months promo on anything over $199, and Acima does lease-to-own starting at $10. Ask about either when you come in or call 678-400-6467.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your 5500 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.