Mazda Mazda3 Wheels

OE size on most MAZDA3s is a 16-inch rim with a 5x114.3 bolt pattern and 67.1mm hub bore — that's been pretty consistent across the 2004 through 2027 lineup, though you'll see some newer models pushing up to 18 or 19 inches from the factory. I've had everything from a 2014 to a 2024 come through here, and the fitment math stays tight once you nail those three specs.

We stock OE-spec replacement wheels for the MAZDA3 — gloss black, machined silver, even some bronze finishes if you want a little more personality without going full plus-size. If you're looking to go bigger, 17-inch and 18-inch setups work fine as long as we dial in the offset right; I usually run around 40 to 45mm offset to keep the wheel tucked without rubbing the strut or brake caliper. Brake clearance is generous on the MAZDA3, so you've got room to work. We keep a few OE sizes on the rack and can order most fitments in 3 to 5 business days.

Once you pick a set, my crew handles the full install in-house. We seat and re-code the TPMS sensors, run a road-force balance on every single wheel — no guessing — torque the lugs to spec, and check hub-centric fit with spigot rings to eliminate vibration. We're a small family-owned shop, so you talk to me or one of the guys doing the work, not a call center. Bilingual service, walk-ins welcome, and we've been doing this in Marietta for fifteen years.

We mount these for folks across Marietta and the surrounding Atlanta area. If you need financing, Synchrony Car Care runs a six-month promotional rate on orders over $199, and Acima lets you lease-to-own starting at ten bucks down. Walk in at 1585 Roswell Rd, call 678-400-6467, or let me know what you're driving.