Mazda Madzaspeed3 Wheels
Fitment by Year
A 2007β2013 MADZASPEED3 rolls on a 5x114.3 bolt pattern with a 67.1mm hub bore, and I keep that fitment in stock. Most folks who come in are running the OE 18-inch setup, but I see a lot of them wanting to go 19-inch or drop down to 17s for a different tire option β and I can make either work with the right offset and brake clearance.
For replacement, I've got OE-style 18-inch wheels in gloss black and machined finishes, plus some plus-one upgrades in 19-inch if you want that aggressive look without sacrificing ride quality. Offset matters on these β the 5x114.3 pattern is tight, and hub-centric spigot rings are non-negotiable. I run road-force balance on every one that leaves my bay, and I re-code the TPMS sensors so your dash doesn't light up the second you drive off the lot.
My crew handles the full install in-house β torque spec to OE, hub-centric fit check, and a test drive to make sure everything feels right. I've been here in Marietta fifteen years running this family shop, and that attention to detail is how we keep folks coming back. We mount these for customers across East Cobb and Roswell, and walk-ins are always welcome.
Financing through Synchrony runs six months promo on anything $199 and up, or Acima gets you started at fifty bucks. Call me at 678-400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec β no vibration, no return trips.
What we double-check on Mazda Madzaspeed3
- Staggered fitments (different front/rear sizes) are common β we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice β once at mount and once after a 25-mile heat cycle.
Common questions about Mazda Madzaspeed3 wheels
What's the bolt pattern on a 2007β2013 Mazda MADZASPEED3?
5x114.3, with a 67.1mm hub bore. I keep that size ready to go, and I make sure every wheel is hub-centric fitted so there's no vibration or runout.
Can I fit 19-inch wheels on my MADZASPEED3?
Yeah, you can go up to 19-inch on these. The key is offset β you want something that clears the brakes and sits flush. I measure each one before it goes on.
Do you install wheels same-day?
Most of the time, yes. I've got a small crew and we run all installs in-house β mounting, balancing, TPMS coding, torque to spec. Come in or call 678-400-6467 to check availability.
Can I finance wheels at Road Runner?
Absolutely. Synchrony Car Care runs a six-month promo on purchases $199 and up, and Acima lets you lease-to-own starting at fifty bucks down.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Madzaspeed3 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned Β· Marietta Β· Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way β that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop Β· no chains
100%
in-house installs Β· road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9β5 Β· TueβFri 9β5:30 Β· Sat 9β5 Β· Sun closed
Mon 9β5 Β· TueβFri 9β5:30 Β· Sat 9β5 Β· Sun closed
Save my garage
Create an account to sync your vehicles, favorite wheels, and cart across devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.