Mazda 929 Wheels
Fitment by Year
The Mazda 929 from 1990 to 1995 rolls on a 5x114.3 bolt pattern with a 67.1mm hub bore, and OE came in 15-inch to 18-inch diameters depending on trim. I've had a few of these come through the shop over the years — solid platform, and folks who own them tend to care about how they sit. We keep fitment options on the rack: straight OE replacement 15s if you want factory spec, or a step up to 17s or 18s if you're going for a cleaner look without compromising ride quality.
When you're shopping upgrades for a 929, offset matters. The OE setup runs pretty neutral, so I usually recommend staying in the 35 to 45mm range to keep brake clearance safe and avoid rubbing. Finish-wise, I stock gloss black, machined aluminum, and bronze — whatever matches your vision. Hub-centric rings come standard on everything we sell; I'm not about loose wheels. Brake clearance is something I double-check on every build, especially if you're going wider than factory.
Here's what happens when you bring your 929 in: I run a hub-centric fit check, seat the TPMS sensors, re-code them to your car's system, and road-force balance every single wheel. Lug torque gets set to spec, and I verify it with a calibrated gun. We're a small crew — family-owned since 2010, so I'm the guy answering the phone and the same person checking your work before you leave. Bilingual service, walk-ins welcome, no appointment needed.
We mount these for folks across Marietta and the surrounding area. Financing runs through Synchrony (6-month promo on $199 or more) or Acima if you want to lease-to-own starting at $10. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Mazda 929
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Mazda 929
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Mazda 929 wheels
What's the bolt pattern on a 1990–1995 Mazda 929?
5x114.3. That's five lugs spaced 114.3mm apart. Hub bore is 67.1mm, so make sure any wheel you buy is hub-centric for that size — I always confirm before install.
Will these wheels fit my Mazda 929?
If your 929 is between 1990 and 1995, yes — as long as the wheel is 5x114.3 with a 67.1mm hub bore. Offset and diameter matter too. I check all three before you drive off.
Can I go up to 18-inch wheels on my 929?
Absolutely. The OE range is 15 to 18 inches, so 18s fit without modification. Just watch offset — I usually stay 35 to 45mm to keep brake clearance and ride smooth.
Do you do same-day wheel install?
Yes. I mount, balance, TPMS code, and torque to spec in-house. How fast depends on how busy we are, but most jobs are done the same day you bring the car in.
Can I finance wheels at Road Runner?
Two options: Synchrony Car Care (6-month promo on $199 or more) or Acima lease-to-own starting at $10. Both are fast to set up.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your 929 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.