GMC Sonoma Wheels
Fitment by Year
I work with a lot of Sonoma owners in here — folks running them as work trucks, weekend rigs, daily drivers hauling a load. Your '95 to 2004 Sonoma rolls on a 5x120 bolt pattern with a 70.30mm hub bore, and OE sizes run anywhere from 205/75-15 up through 235/75-15 depending on the year and trim. That bolt pattern and hub spec is exactly what I keep in mind the second someone walks in looking to upgrade from stock.
We stock OE replacement options for Sonomas — 15-inch to 24-inch diameters, gloss black, machined, bronze, whatever finish you're after. If you want to go plus-size, I've got offset and brake-clearance specs locked down; we typically run 5 to 6 inches of backspace on a Sonoma without rubbing or interfering with the caliper. I keep common sizes on the rack, but I can order specialty stuff in a few days if we don't have it.
When your wheels come in, my crew runs them hub-centric on the spigot ring, seats the TPMS sensors fresh, road-force balances every one, and torques the lugs to factory spec. We've been here in Marietta fifteen years — been doing this work in-house the whole time, no shortcuts. Walk-ins welcome, and we work in English and Spanish.
We mount these for folks all across Marietta and the surrounding areas. If you need financing, we run Synchrony Car Care on purchases $199 and up, or Acima lease-to-own starting at $10. Call me at (678) 400-6467, stop by 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the GMC Sonoma
In-stock wheels on the 5x120 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
-
OE Wheels
OE Wheels CV25 — Satin Black
From $244.00
-
OE Wheels
OE Wheels CV25 — Gloss Black
From $244.00
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on GMC Sonoma
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about GMC Sonoma wheels
What's the bolt pattern on a GMC Sonoma?
5x120, all model years 1995 through 2004. Hub bore is 70.30mm. That's the spec I use to dial in fitment every single time.
What rim sizes fit a Sonoma?
OE runs 15 inches up to 24 inches depending on the year. I can fit anything in that range as long as the offset and brake clearance work. Common upgrades are 17 and 18 inches for better ride and looks.
Do you install wheels same-day?
Most of the time, yes. Walk in or call (678) 400-6467 and I'll let you know where we're at. We mount and balance in-house, and the crew works fast.
Can I finance wheels at Road Runner?
Yeah. Synchrony Car Care on orders $199 and up, or Acima lease-to-own starting at ten bucks. Both are quick to set up.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Sonoma without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.