GMC K-2500 Wheels
Fitment by Year
Between 1988 and 2000, GMC K-2500 trucks rolled out with either a 6x139.7 or 8x165.1 bolt pattern, 16- to 30-inch rim diameters, and hub bores of 78.10 or 116.70 millimeters—depending on year and cab config. OE sizes ran LT245/75-16 or LT265/75-16 on most of these trucks. I see a lot of K-2500s come through here, and the fitment math is straightforward once you know which generation you're working with.
We stock both OE-style replacements and plus-size upgrades for this platform. If you're running the original 16-inch diameter, I can get you matched replacements in the same load range, or you can step up to 18, 20, or 22 inches with the right offset and brake clearance—I keep tabs on what clears the suspension and caliper on each year. Finishes run gloss black, machined, bronze, and polished. The bolt pattern and hub bore determine everything, so I verify those first before we talk size or style.
Once you pick your wheels, my crew handles the full install in-house. I run road-force balance on every one, reseat and re-code the TPMS sensors, torque the lugs to spec, and double-check hub-centric fit with spigot rings. We're bilingual, walk-ins are always welcome, and we've been in Marietta for fifteen years doing this work ourselves—no outsourcing, no guessing. You watch it happen.
We mount these for folks across Marietta, East Cobb, and Roswell. Financing runs through Synchrony (6 months on purchases $199 and up) or Acima if you prefer lease-to-own. Walk in at 1585 Roswell Rd, call 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on GMC K-2500
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about GMC K-2500 wheels
What's the bolt pattern on a GMC K-2500?
Most K-2500s from 1988 to 2000 use either 6x139.7 or 8x165.1. Year and cab style determine which one you've got. Bring your truck by or send a photo of the wheel, and I'll confirm it in about thirty seconds.
Will these wheels fit my K-2500?
If the bolt pattern, hub bore (78.10 or 116.70 mm), and rim diameter match your truck's specs, yes. I verify fitment before we order anything. Offset and brake clearance matter too, especially if you're going bigger than OE.
Can I finance wheels at Road Runner?
Absolutely. We work with Synchrony (6 months interest-free on $199+) and Acima (lease-to-own starting at $10). Both are quick to set up, and you drive out the same day.
Do you install wheels same-day?
Most of the time, yes. We balance, TPMS reseat, torque to spec, and road-force check in-house. Walk-ins are fine. If it's a busy Saturday, I'll let you know the wait upfront.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your K-2500 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.