GMC K-1500 Wheels
Fitment by Year
Between 1988 and 1998, GMC K-1500s came from the factory on 16-inch rims with a 6x139.7 bolt pattern and a 78.10mm hub bore — and I've had plenty of these trucks roll in over the years looking to upgrade or replace their wheels. The OE sizes ran LT245/75-16 or LT265/75-16 depending on the year and configuration, and if you're shopping for a replacement set, knowing that bolt pattern and hub bore upfront saves a lot of back-and-forth.
We stock both OE-style replacements and plus-size options for the K-1500 generation. If you want to keep things stock, I've got 16-inchers on the rack in gloss black and machined finishes. If you're looking to go bigger — and a lot of K-1500 owners do — we can fit 17-inch, 18-inch, even 20-inch setups, as long as we nail the offset and brake clearance for your specific year and suspension setup. The hub bore is tight at 78.10mm, so I always run spigot rings to keep the wheel centered on the hub. That matters more on a truck than people think — it keeps vibration down and your balance true.
When your truck comes in, my crew checks every detail. We verify the hub-centric fit, seat the TPMS sensors, road-force balance every wheel, and torque the lugs to spec. I've been doing this for fifteen years right here in Marietta with the same crew, and we handle everything in-house — no shipping wheels out, no guessing on fitment. We're bilingual, walk-ins are always welcome, and if you've got questions about offset or load rating for your specific year, I can walk you through it.
We mount these for folks across Marietta and East Cobb, plus folks from Sandy Springs and Kennesaw who know the shop. If you need financing, we work with Synchrony (6 months promo on $199 and up) and Acima ($50 to start). Walk in at 1585 Roswell Rd, call 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the GMC K-1500
In-stock wheels on the 6x139.7 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
-
ION
ION Type 143 — Matte Black
From $175.60
-
Method Race Wheels
Method Race Wheels MR703 Bead Grip — Matte Black
From $389.00
-
RBP
RBP 01R Saharan II — Gloss Black Milled
From $142.99
-
American Racing
American Racing AR23 — Machined
From $161.99
-
Vision Street
Vision Street Rapier — Gloss Black Milled Spoke
From $298.72
-
Method Race Wheels
Method Race Wheels MR703 Bead Grip — Bronze
From $366.00
-
Fittipaldi
Fittipaldi FT104SB — Satin Black
From $186.00
-
OE Wheels
OE Wheels TY10 — Chrome
$335.75
-
KG1 Forged
KG1 Forged KS602 — Milled
From $275.00
-
Torque
Torque Heritage — Satin Black
$249.00
-
Method Race Wheels
Method Race Wheels MR322 — Gloss Black
From $335.00
-
DUB 1PC
DUB 1PC DC273 PULL — Gloss Black Milled
From $529.99
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on GMC K-1500
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about GMC K-1500 wheels
What's the bolt pattern on a 1988–1998 GMC K-1500?
6x139.7 — that's six lugs on a 139.7mm circle. The hub bore is 78.10mm, so I always use spigot rings to keep the wheel centered. That's a detail a lot of shops skip, but it matters for balance and ride quality.
What size wheels fit my K-1500?
OE came on 16-inch rims, and you can go up to 20-inch or bigger depending on your suspension and brake setup. I need to know your year and whether you've lifted or modified the truck to recommend offset and clearance. Come by or call and we can dial it in.
Do you install wheels same-day?
Yeah, we mount and balance in-house — no waiting for a shop to outsource. Depends on how busy we are that day, but most jobs are done while you wait or within a few hours. Call ahead if you want to be sure.
Can I finance wheels at Road Runner?
We offer Synchrony financing (6 months promo on purchases $199 and up) and Acima lease-to-own starting at $10. Either way, we can get you rolling without breaking the bank.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your K-1500 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.