GMC Acadia Wheels
Fitment by Year
Between 2008 and 2027, GMC Acadia runs either 5x120 or 6x120 bolt pattern with a hub bore of 67mm or 66.9mm, and OE sizes range from 235/65-18 up to 265/45-22 depending on the year and trim. I keep both patterns on the rack because folks swap between them, and getting that hub-centric fit right on the first shot saves a return trip.
We stock OE-style replacements in 18, 20, and 22 inch diameters, plus upgrade options in gloss black, machined, and bronze finishes. Offset and brake clearance matter here — a '19 came in last month wanting to go wider, and we had to dial in the right offset so the wheel didn't rub the caliper. I'll walk you through what works for your specific year and suspension setup.
We're a small crew, not a chain, so I'm the one running road-force balance on every wheel, reseating and recoding TPMS sensors, and torquing lugs to spec. Bilingual service, walk-ins welcome, and I double-check the hub-centric fit before you leave. Fifteen years in Marietta means I know what holds up on these roads.
We mount these for folks across Marietta, East Cobb, and Roswell. Financing through Synchrony (6 months on $199+) or Acima lease-to-own ($50 to start). Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on GMC Acadia
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about GMC Acadia wheels
What's the bolt pattern on a GMC Acadia?
Most Acadias are 5x120, but some years run 6x120. I check your VIN or year to confirm which one you've got. Hub bore is 67mm or 66.9mm depending on the model year. That's why I always verify before you drive off.
Will these wheels fit my Acadia?
As long as it's 2008 or newer, I can fit you. I make sure the offset clears your brakes and the hub-centric ring seats right. Bring your year and trim, or just come by and I'll check it out in person.
Do you install wheels same-day?
Yeah, we do installs in-house. Road-force balance, TPMS, lug torque to spec. Usually takes an hour or two depending on how busy we are. Call ahead if you want to lock in a time.
Can I finance wheels at Road Runner?
Yes. Synchrony Car Care gives you 6 months promo on purchases $199 and up. Acima lease-to-own starts at $50. Both are quick to set up.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Acadia without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.