Genesis G70 Wheels
Fitment by Year
A 2019–2027 Genesis G70 rolls on a 5x114.3 bolt pattern with a 67.1mm hub bore, and most come OE with a 19-inch rim—either 225/40-19 or 255/35-19 depending on trim. I see a lot of these come through, and the fitment is straightforward once you nail those three numbers. We're a family-owned shop, so when you call with a fitment question, you're talking to me, not a call center.
I stock OE-spec replacements in 19-inch for folks who just need the same look and feel back, plus I can build you a plus-size setup if you want to go 20-inch and run a staggered setup—common move on the G70. Offset matters here; most of these run 45mm or 50mm depending on the trim, and I check brake clearance before you leave. Gloss black, machined silver, bronze—I've got finishes in house. The hub bore is tight at 67.1mm, so I use hub-centric rings on every wheel to keep the center true and your balance spot-on.
Once you're in the chair, my crew runs road-force on every one, seats the TPMS, codes it to your car's computer, and torques lugs to spec—no guessing. We mount these for folks across Marietta, East Cobb, and Kennesaw. Synchrony financing runs 6 months on anything $199 or over, and Acima lease-to-own starts at $50 if you need it that way. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Genesis G70
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Genesis G70
- OE wheels are hub-centric and TPMS-equipped — we reseat sensors, re-code where needed, and verify hub-bore fit before torque.
- Several model years originally came with run-flat-compatible wheels and staggered fitment. We confirm front/rear sizing before mount.
- Tight wheel-well clearance on lowered or sport trims — we check rub on full lock and full compression before you leave.
Common questions about Genesis G70 wheels
What's the bolt pattern on a Genesis G70?
5x114.3, same across all model years 2019 to 2027. Hub bore is 67.1mm. I always confirm your specific year and trim when you call, just to make sure we're matching offset and brake clearance, but the bolt pattern doesn't change.
Will these wheels fit my 2019–2027 Genesis G70?
If they're cast for 5x114.3 and hub-centric at 67.1mm, yes. I check offset and clearance to your brakes before you drive off. Most G70s run 45mm or 50mm offset depending on trim, and that matters for how the wheel sits in the well.
Can I go from 19-inch to 20-inch wheels on my G70?
Yes, a staggered 20-inch setup is popular on these. You'd drop tire sidewall a bit to keep your speedometer honest, and I verify brake clearance. I've done it plenty of times—just call me with your trim and I'll tell you what works.
Do you install wheels same-day?
Most of the time, yes. I've got my crew in house doing every mount, balance, TPMS work, and lug torque to spec. Walk-ins are welcome. If you call ahead at (678) 400-6467, I can tell you the exact wait.
Can I finance wheels at Road Runner?
Yep. Synchrony Car Care runs a 6-month promo on anything $199 or over, and Acima lease-to-own starts at $50. I'll walk you through both when you're here.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your G70 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.