Ford VX3 Wheels
Fitment by Year
Between 1997 and 2002, the Ford VX3 rolled on 14- to 16-inch rims with a 4x108 bolt pattern and 54.1mm hub bore—and I've had plenty of these come through the shop over the years. OE sizes ran 185/65-14 on the base trim, but owners often wanted to go bigger. We keep common fitments on the rack and can source anything custom you're after.
When you're looking to upgrade or replace, you've got options. I stock OE-style 14- and 15-inch replacements in gloss black and machined finishes, and if you want to plus-size up to a 16-inch, we can do that too—just need to dial in the offset and make sure your brakes clear. The 4x108 pattern is straightforward, and the 54.1mm hub bore means we can run hub-centric rings to keep everything centered. Offset usually runs anywhere from ET25 to ET35 depending on what look you're going for and how much suspension you've got.
Once you pick your wheels, my crew handles the full install in-house. We check the hub-centric fit, seat the spigot rings, reset and code the TPMS sensors, road-force balance every wheel, and torque the lugs to Ford spec. Been doing this work in Marietta for fifteen years now—it's just how we do it. We're bilingual, walk-ins are always welcome, and if you've got questions while we're mounting, you can ask me directly.
We mount these for folks across Marietta, East Cobb, and Roswell. If you need financing, Synchrony Car Care runs a 6-month promo on purchases over $199, and Acima can get you started for $10 down with lease-to-own. Walk in at 1585 Roswell Rd, call me at 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ford VX3
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Ford VX3 wheels
What's the bolt pattern on a Ford VX3?
4x108. That's 4 lugs on a 108mm circle. Hub bore is 54.1mm, so we use hub-centric rings to center the wheel on the vehicle. Straightforward fitment—I see these all the time.
Can I fit 16-inch wheels on my VX3?
Yes. OE goes up to 16 inches, so we can definitely do a 16-inch upgrade. You'll want to check your brake clearance and make sure the offset works with your suspension, but it's doable. Bring it by or call and we'll figure out what works.
Do you install wheels same-day?
Most of the time, yeah. Depends on how busy we are and what you need—TPMS resets, balancing, all of it. Call ahead at 678-400-6467 and we'll let you know the timeline. Walk-ins are fine too.
Can I finance wheels at Road Runner?
We've got two options. Synchrony Car Care gives you 6 months with no interest on orders over $199. Acima is lease-to-own and starts at $10 down. Either way, we handle it right here.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your VX3 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.