Ford Taurus Wheels

Between 1986 and 2019, we've had a lot of Taurus models roll through here, and I can tell you the OE fitment is straightforward—5x114.3 bolt pattern, 63.4mm hub bore, and rim diameters running 18 to 20 inches depending on the year and trim. Most folks don't realize how much the platform evolved over those three decades, but the lug pattern stayed consistent, which makes upgrades pretty clean.

I stock OE-style replacements across that range—18-inch, 19-inch, and 20-inch options in gloss black, machined silver, and bronze finishes. If you're looking to go plus-size, a 20-inch setup with a 255/45 or 245/45 tire gives you that modern look without brake-clearance headaches on your Taurus. Offset and backspacing matter here; I typically run 35–45mm offsets depending on whether you want a flush fit or a little poke. Hub bore is 63.4mm across the board, so spigot rings keep everything centered.

When your wheels come in, my crew runs road-force balance on every one—that's the machine that spins your tire and wheel together to find the heavy spot and correct it. We check hub-centric fit, reseat and reprogram TPMS sensors, and torque lugs to Ford spec. Been doing this in-house for fifteen years here in Marietta, so walk-ins are always welcome, and we speak English and Spanish. No waiting for a chain to outsource your install.

We mount these for folks across Marietta, East Cobb, and the broader Atlanta side. Financing runs through Synchrony (6 months promo on $199 and up) or Acima lease-to-own if that works better. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.