Ferrari F430 Wheels

OE size on a 2005–2009 F430 is 225/35-19 up front and 285/35-19 out back, both sitting on 20-inch rims with a 5x108 bolt pattern and 67.1mm hub bore. I see these cars come through every couple of years, and the first thing I check is whether someone's already swapped wheels or if we're fitting against factory specs. Hub-centric fitment matters on these — the spigot ring has to seat right, or you're looking at vibration you can't balance out.

For replacements, I stock OE-style 20-inch options in gloss black and machined finishes, and we can source plus-size setups if you want to go bigger without killing the ride. The offset on the F430 is pretty specific — you're looking at something around ET 35 to ET 40 depending on which position we're talking about. Brake clearance is tight on these, so I always verify fitment against the caliper before we mount anything. If you're running a different tire width or diameter, we nail down the math first.

Once we've got the right wheel, my crew runs every install the same way: hub-centric rings seated, TPMS sensors reseated and coded to the car, road-force balance on every single rim, and lug torque to Ferrari spec. I've been doing this in Marietta for fifteen years now, and I don't cut corners on the finish work. We're bilingual in the shop, walk-ins are welcome, and you can call me at 678-400-6467 to confirm fitment before you come by.

We mount wheels for folks across Marietta and East Cobb, plus folks heading down from Sandy Springs and Roswell who don't want to wait around at a chain. Financing through Synchrony is available on orders over $199, and Acima lease-to-own starts at $50 if that works better for your situation. Walk in, call, or book online below.