Ferrari California Wheels
Fitment by Year
I see a lot of these California models come through — 2008 to 2018 — and the OE setup is a 20-inch wheel, 5x114.3 bolt pattern, 66.90mm hub bore. Most folks are either replacing a bent or curbed OE piece or stepping up to something with a different finish or offset. Either way, I keep the fitment specifics locked in before we even quote you.
We stock OE-style replacements in gloss black and machined finishes, and I can source plus-size options if you want to go 20-inch with a different width — say, moving from a 245 or 285 width to something that still clears the brake hardware. The offset matters here; Ferrari's pretty particular about where that wheel sits relative to the hub and the fender. I run the numbers on every fitment before install.
When my guys mount a set for a California, we're checking hub-centric fit, resetting and coding the TPMS sensors, road-force balancing every wheel, and torquing the lugs to Ferrari spec. I've been doing this in-house for fifteen years here in Marietta — no outsourcing, no guessing. We're bilingual, and walk-ins are fine if you want to talk through options in person.
We mount wheels for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta side. Financing through Acima starts at $50, and Synchrony has a 6-month promo on purchases $199 and up. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Ferrari California
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ferrari California
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Ferrari California wheels
What's the bolt pattern on a Ferrari California?
5x114.3. That's consistent across the 2008–2018 range. Hub bore is 66.90mm, so I always use hub-centric rings to seat the wheel properly and keep it from vibrating.
Will these wheels fit my 2015 California?
If it's an OE 20-inch or a fitment-correct 20-inch replacement, yes. I verify offset and brake clearance before you buy. We keep the specs on file so there's no guessing on install day.
Do you install wheels same-day?
Usually, yeah. Depends on how busy we are, but I'll tell you straight when you call or walk in. We mount, balance, code the TPMS, and torque everything to spec in-house.
Can I finance wheels?
Yep. Acima lease-to-own starts at $10 down, and Synchrony has a 6-month promo on orders over $199. I can walk you through both options when you're ready.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your California without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.