Ferrari 488 Wheels
Fitment by Year
I see a lot of these 488s come through—2016 to 2021 models—and the fitment is straightforward once you know what you're working with. OE size runs 245/30-20 up front and 305/30-20 in the rear on a 5x114.3 bolt pattern with a 67.10mm hub bore. That's a wide rear tire, and it means you've got options if you want to go bigger or swap to a different finish without sacrificing brake clearance or ride quality.
I keep a range of 20- and 22-inch options on the rack—gloss black, machined, bronze finishes—and I can talk you through offset and width depending on whether you want to stay close to OE or step up a size. The 488's got a tight wheel well, so I'm careful about plus-sizing; I've had a couple come in where the owner wanted aggressive fitment and we had to dial it back. Brake clearance is real here. I run the numbers on every build before we touch the car.
Once you pick your setup, my crew handles the full install in-house. I road-force balance every wheel, reseat and re-code the TPMS sensors, check hub-centric fit and spigot ring seating, and torque the lugs to Ferrari spec. Bilingual crew, walk-ins welcome. Been here in Marietta fifteen years, family-owned since 2010, and I do this work myself—not farming it out.
We mount these for folks across Marietta, Kennesaw, Roswell, and the broader Atlanta area. Financing available through Synchrony (6-month promo on $199+) or Acima lease-to-own ($50 to start). Walk in, call 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Ferrari 488
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ferrari 488
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Ferrari 488 wheels
What's the bolt pattern on a 2016–2021 Ferrari 488?
5x114.3. Hub bore is 67.10mm. I've got spigot rings in stock if you need them for a wheel that doesn't have that bore pre-drilled. Makes the fit hub-centric and solid.
Can I go bigger than the OE 20-inch wheels on my 488?
You can step to 22 inches, but brake clearance is tight. I check fitment on every build—offset and width matter. I've had to talk owners back from aggressive setups because the calipers won't clear. Let's measure your specific car before you buy.
Do you install wheels same-day?
Most of the time, yes. Depends on how busy we are and what work's ahead of you. Call 678-400-6467 and I'll let you know. I run road-force balance and TPMS re-code on every install, so it's not a quick job—it's done right.
Can I finance wheels at Road Runner?
Yeah. Synchrony Car Care runs a 6-month promo on purchases $199 and up, or Acima lets you lease-to-own starting at $10. I can walk you through both when you come in.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your 488 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.