Chrysler PT Wheels
Fitment by Year
I've had plenty of 2001–2010 PT Cruisers roll in here, and the first thing I confirm is the OE size—usually a 205/55-16, 205/50-17, or 195/65-15 depending on the year and trim. All of them sit on a 5x100 bolt pattern with a 57.1mm hub bore, which is pretty straightforward once you know it. Most folks come in thinking they need to guess, but I just grab the spec sheet and we nail the fitment in two minutes.
We keep OE-style replacements on the rack—16-inch, 17-inch, and 19-inch options in gloss black, machined, and bronze finishes. If you're looking to go plus-size, I typically run a 17 or 18 on these cars without brake clearance headaches; offset sits around 38 to 45 depending on the rim. I had a 2006 come in last month wanting a sportier stance, and we went with an 18-inch with a +40 offset—looked sharp, no rubbing, no drama.
Once you pick your wheel, my crew handles everything in-house. I run road-force balance on every one, reseat and re-code the TPMS sensors, check hub-centric fit with the spigot ring, and torque the lugs to Chrysler spec. We've been doing this fifteen years right here in Marietta, and I don't cut corners on the install. Walk-ins are always welcome, and we work in English and Spanish.
We mount these for folks across Marietta, East Cobb, and Sandy Springs. If you need financing, Synchrony Car Care runs a 6-month promo on orders $199 and up, and Acima lets you lease-to-own starting at $10. Call me at 678-400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Chrysler PT
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Chrysler PT wheels
What's the bolt pattern on a Chrysler PT?
5x100. All model years 2001–2010 use the same bolt pattern, so fitment is consistent across the lineup. Hub bore is 57.1mm, so make sure any wheel you pick is hub-centric or I'll ring it for you.
What wheel sizes fit a PT Cruiser?
OE runs 15, 16, 17, or 19 inches depending on the year and trim. I stock 16, 17, and 18-inch options. Go bigger than 19 and you'll fight brake clearance; smaller than 15 and you lose the look. I can show you what works for your specific year when you stop by.
Do you install wheels same-day?
Yeah, most of the time. I mount, balance, reseat TPMS, and torque everything to spec in-house. Walk-ins are fine—just call ahead if it's busy and I'll let you know the wait.
Can I finance wheels at Road Runner?
Synchrony Car Care handles financing with a 6-month promo on orders $199 and up. Acima also works—lease-to-own starting at $10. Both are quick to set up, and I can walk you through it.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your PT without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.