Chevrolet BEL Wheels
Fitment by Year
Between 1955 and 1957, Chevrolet built the BEL with a 5x120 bolt pattern and 70.30mm hub bore — I've had a few of these classics come through the shop over the years, and they're solid platforms for a wheel swap. OE sizes ran 205/75-15, but depending on what you're after, there's room to go bigger. The key is getting the offset and hub-centric fit dialed in so the wheel sits flush and safe.
I stock both OE-style 15-inch replacements and plus-size options up to 24 inches for the BEL, depending on your brake clearance and suspension setup. Finishes run gloss black, machined aluminum, bronze — whatever matches your vision. The 5x120 pattern is straightforward to work with, and I always double-check the hub bore against our spigot rings to make sure there's zero play. Offset matters too; too much poke and you're rubbing the fender, too much dish and the wheel tucks inside the well.
When your wheels come in, my crew runs them hub-centric on the car, seats any TPMS sensors if you're going that route, and road-force balances every single one. We've been doing this in-house for fifteen years here in Marietta — no shortcuts, no outsourcing. I torque the lugs to spec and send you out knowing the job's done right. We're bilingual, walk-ins are always welcome, and if you need to spread the cost, we've got Synchrony financing on purchases over $199 and Acima lease-to-own starting at $10.
We mount wheels for folks across Marietta, East Cobb, and the surrounding Atlanta area. Call me at 678-400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Chevrolet BEL
In-stock wheels on the 5x120 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
-
OE Wheels
OE Wheels CV25 — Satin Black
From $244.00
-
OE Wheels
OE Wheels CV25 — Gloss Black
From $244.00
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Chevrolet BEL
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Chevrolet BEL wheels
What's the bolt pattern on a 1955–1957 Chevrolet BEL?
Will these wheels fit my Chevrolet BEL?
Do you install wheels same-day?
Can I finance wheels at Road Runner?
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your BEL without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.

