Buick Verano Wheels

I've had a fair number of 2012–2016 Verano owners roll through here looking to swap out their 18-inch OE wheels, and the fitment specs are straightforward: 5x114.3 bolt pattern, 70.30mm hub bore, and you've got room to play with diameters from 18 up to 20 inches depending on your tire choice and suspension setup. Most folks come in running the factory 235/45-18 or want to go a touch wider, and I'll walk you through what clears your brakes and what offset keeps the wheel sitting right in the fender.

I stock OE-replacement wheels in that 18 to 20 inch range — gloss black, machined finishes, some bronze options if you want a different look — and I can also source plus-size setups if you're after a more aggressive stance. The key is brake clearance; I check that before anything goes on the car. Offset matters too. For a Verano, you're typically looking at something in the +35 to +45 range to keep the wheel centered without rubbing or sticking out past the fender line. I'll measure your current setup and give you the real numbers so there's no guessing.

When your wheels come in, my crew runs them through the whole process: hub-centric fit verification, spigot ring install if needed, TPMS sensor reseat and re-code, road-force balance on every one, and lug torque to spec. We've been doing this in-house for fifteen years right here in Marietta, and I'm here to answer questions whether you walk in, call, or want to book ahead. Bilingual service, no problem.

We mount these for folks across Marietta, East Cobb, and the surrounding Atlanta area. If you need financing, Synchrony Car Care runs a 6-month promo on purchases $199 and up, and Acima's lease-to-own starts at $50. Walk in at 1585 Roswell Rd, call (678) 400-6467, or hit the booking link below.