Audi Q5 Wheels

We've been fitting wheels on Q5s since 2009, and I can tell you right off—your OE setup is either a 19-inch or 20-inch with a 5x112 bolt pattern and 66.56mm hub bore. That spec's stayed consistent across the whole run, which makes our job easier and yours cheaper. I keep a solid range of 19- and 20-inch options in stock, so most of the time you're not waiting on an order.

What I typically see come through is folks either replacing a bent OE wheel or going up one size for looks and handling. If you're staying with 19s, you've got room to breathe on fitment—offset usually runs between +35 and +55mm depending on the style. Jump to 20s and we need to dial it in tighter, but it's done all the time. I stock gloss black, machined, and bronze finishes, and we always verify brake clearance before you leave. The hub bore is tight at 66.56mm, so I run hub-centric rings on every install—no guessing, no rattle down the road.

When your wheels come in, my crew handles everything in-house. We seat the TPMS sensors, run a road-force balance on every wheel, and torque the lugs to Audi spec. I've been here fifteen years in Marietta doing this the right way—no shortcuts. Bilingual crew, walk-ins always welcome, and we're open six days a week.

We mount these for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta side. Financing through Synchrony Car Care runs six months on orders over $199, and Acima lease-to-own starts at ten bucks down. Walk in at 1585 Roswell Rd, call 678-400-6467, or book online below.