Pro Comp Alloys PA31 STRYKER 5/6/8-Lug Black Wheels

Back to Results

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick one of these up and the first thing you notice is the face — multi-spoke construction with defined spoke edges that create real depth rather than a flat stamped appearance. The spokes taper toward the barrel in a way that reads aggressive without being overwrought. At zero offset, the face sits flush with the fender plane on most body-on-frame trucks, which is exactly where you want it. Black finishes like this one pair cleanly with white, silver, and gunmetal body colors, though honestly they disappear in the best possible way against flat black or dark grey trucks. Full-size pickups and body-on-frame SUVs are the natural home here — the 5x139.7 pattern points directly at Chevy, GMC, Ram, and Toyota truck platforms.

Specifications

Diameter x Width	20" x 9"
Bolt Pattern	5x139.7
Offset	ET+0mm
Backspacing	5.00"
Hub Bore	108.00mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	BLACK
Manufacturer Part Number	PXA7031-2985

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x139.7 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+0mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BLACK Finish

Pro Comp Alloys has been producing wheels for the truck and off-road segment for decades, and the PA31 line reflects their focus on fitment accuracy and finish durability over flash. They're not chasing boutique positioning — they build cast wheels that hold up in real use, priced for drivers who put actual miles on their rigs. Solid mid-tier choice with consistent quality control.

About Pro Comp Alloys

Pro Comp Alloys produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is built on a 5x139.7 bolt pattern with a 20x9 size and 0mm offset. That combination covers a wide range of full-size trucks and SUVs, but you should always verify your specific year, make, and model — hub bore, brake caliper clearance, and suspension lift height all factor into a proper fitment confirmation.

Do lug nuts come included?

Lug nuts are not included with the wheel. Because seat type and thread pitch vary by vehicle, we recommend confirming your factory lug nut spec before ordering. We carry a full selection of conical and flat-seat lug nuts in the hardware section if you need to add them to your order.

Fitment specs: the Pro Comp Alloys PA31 STRYKER comes in 5x139.7 bolt pattern, ET+0 offset, 5.00" backspacing, 108.00mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button