Pro Comp Alloys PA206 SNARE 5/6/8-Lug Gloss Slvr Wheels

Back to Results

Pro Comp Alloys PA206 SNARE — Gloss Silver W/ Machined Face

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick up the Snare and you notice right away that the face isn't trying too hard. The spoke layout is structured and even — the kind of design that reads as intentional rather than busy. Where the machining cuts across the face, you get a contrast between the bright, tight grain of the cut aluminum and the surrounding gloss silver, and that transition catches light differently depending on the angle you're looking from. Stationary, it looks solid. Rolling, the machined sections flash in a way that adds visual motion without any chrome drama. Body colors in the white, silver, and light gray range let the wheel blend in cleanly, while darker trucks — charcoal, black, deep navy — give the machined face more room to stand out. This is a wheel that works across half-tons, older body-on-frame SUVs, and midsize trucks without looking out of place on any of them.

Specifications

Diameter x Width	16" x 8"
Bolt Pattern	5x114.3
Offset	ET+0mm
Backspacing	4.50"
Hub Bore	74.10mm
Load Rating	4000 lbs
Construction	Cast
Material	Aluminum alloy
Finish	GLOSS SILVER W/ MACHINED FACE
Manufacturer Part Number	PA206SD16805T00

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x114.3 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+0mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the GLOSS SILVER W/ MACHINED FACE Finish

Pro Comp Alloys has been in the truck and off-road wheel space long enough to build a track record across a wide range of applications. Their cast wheels are produced to consistent dimensional standards, and the PA206 line reflects their practical approach — functional styling, reliable construction, accessible pricing. They're not the flashiest name in the segment, but they're a known quantity with good parts availability and straightforward fitment data.

About Pro Comp Alloys

Pro Comp Alloys produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

The PA206 Snare in 16x8 runs a 5x114.3 bolt pattern with a 0mm offset, which is common across a wide range of domestic and import trucks and SUVs — but bolt pattern alone doesn't confirm fitment. You'll want to verify hub bore, brake caliper clearance, and any potential fender contact before mounting, especially if you're running a leveling kit or a lift.

Do lug nuts come included?

No, lug nuts are not included with the wheel. Because seat style and thread pitch vary by vehicle, we recommend confirming your factory lug spec — most trucks in this bolt pattern use either a conical or a shank-style seat — and sourcing the correct hardware separately. We carry a range of lug nuts in-store and can help you match them at the time of purchase.

Fitment specs: the Pro Comp Alloys PA206 SNARE comes in 5x114.3 bolt pattern, ET+0 offset, 4.50" backspacing, 74.10mm hub bore, a 4000 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button