Fitment

This wheel runs the 6x135 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-18mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the GLOSS BLACK MILLED - LEFT Finish

Moto Metal has been producing truck and off-road wheels since the early 2000s, operating under the Wheel Pros umbrella. Their catalog leans hard into aggressive fitments — deep negative offsets, large diameters, and bold face designs built for lifted applications. Construction is cast across most of their lineup, which keeps pricing accessible while delivering adequate strength for the street and moderate trail use their core customer base actually does.

About Moto Metal

Moto Metal produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled 6x135, which covers Ford F-150 and Expedition models going back to the early 2000s. That said, the -18mm offset and 10-inch width almost always require a leveling kit or lift to clear the fender with a tire sized appropriately for that stance — run your specific year and trim through a fitment check before ordering.

Do lug nuts come included?

No, lug nuts are sold separately. Aftermarket wheels with a gloss or milled finish typically need mag-style, thin-seat lug nuts rather than the OEM conical seat hardware, so confirm your seat type before purchasing. Using the wrong lug seat can compromise clamping force and damage the wheel seat over time.

Fitment specs: the Moto Metal MO997 HURRICANE comes in 6x135 bolt pattern, ET-18 offset, 4.79" backspacing, 87.10mm hub bore, a 2500 lbs load rating.