Fuel 1PC FC405 DYNAMO 6x135/6x139.7 Black Wheels

Back to Results

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick one of these up and the first thing you notice is how clean the face is without being plain. The Dynamo runs a multi-spoke layout with a slight directional flow — spokes taper from a thick hub area out toward the lip, which keeps the eye moving and makes a 20-inch wheel read larger than it actually is. That recessed window between spokes is deep enough to show off a big brake caliper nicely. The Black finish sits flat and purposeful rather than flashy, which means it works well against white, tan, gray, and dark-green body colors — basically anything in the Jeep and full-size truck palette. It's a forged piece, so the cross-section through the spoke feels dense and solid, not hollow like a flow-form.

Specifications

Diameter x Width	20" x 10"
Bolt Pattern	5x127
Offset	ET-18mm
Backspacing	4.79"
Hub Bore	71.50mm
Load Rating	2650 lbs
Construction	Forged
Material	Aluminum alloy
Finish	BLACK
Manufacturer Part Number	FC405MB20105018N

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 5x127 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-18mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BLACK Finish

Fuel Off-Road has been producing truck and Jeep-specific wheels long enough to understand that offset and load rating matter as much as aesthetics. Their 1PC forged lineup sits above the cast and flow-form tiers in terms of weight and strength-to-weight ratio. They're not a boutique forging house, but the FC405 Dynamo reflects genuine engineering decisions rather than just styling choices.

About Fuel 1PC

Fuel 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is spec'd at 20x10 with a -18mm offset on a 5x127 bolt pattern, which is a direct match for many Jeep Wrangler JK and JL models, as well as select Gladiator applications. That said, always confirm your specific year, trim, and any lift or leveling kit before ordering — backspacing and hub bore clearance both matter.

Do lug nuts come included?

Lug nuts are not included with the wheel. Most aftermarket wheels require open-ended or spline-drive lug nuts to clear the deeper lug seat, so confirm the correct seat type and thread pitch for your vehicle before purchasing hardware separately.

Fitment specs: the Fuel 1PC FC405 DYNAMO comes in 5x127 bolt pattern, ET-18 offset, 4.79" backspacing, 71.50mm hub bore, a 2650 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button