Fuel 1PC D713 RAGE PLATINUM 5/6/8-Lug Brsh GM Wheels

Back to Results

Fuel 1PC D713 RAGE PLATINUM — Brushed Gun Metal Tinted Clear

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick one of these up and the first thing you notice is how the multi-spoke face carves inward with sharp, machined bevels between each spoke. It's not a busy design — Fuel kept the spoke count controlled so each arm reads clean from a distance. The brushed gun metal tinted clear layer catches light differently depending on the angle: direct sun pulls out a warm metallic sheen, shade flattens it to a cool, almost graphite tone. That range makes it work exceptionally well against white, black, magnetic gray, and even darker navy body colors. It suits lifted trucks more than anything dressed for street-only use — the proportions were clearly drawn with a leveled or lifted full-size in mind.

Specifications

Diameter x Width	20" x 10"
Bolt Pattern	8x170
Offset	ET-18mm
Backspacing	4.79"
Hub Bore	125.10mm
Load Rating	3700 lbs
Construction	Cast
Material	Aluminum alloy
Finish	BRUSHED GUN METAL TINTED CLEAR
Manufacturer Part Number	D71320001747

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 8x170 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-18mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BRUSHED GUN METAL TINTED CLEAR Finish

Fuel Offroad has been producing truck and Jeep fitments long enough that their casting quality and finish consistency are well-documented in the enthusiast community. The 1PC designation means this is a single-piece cast construction — no seams, no barrel welds to worry about. They spec their hardware and load ratings for the trucks these wheels actually go on, which matters on platforms like the Super Duty that see genuine towing and hauling use.

About Fuel 1PC

Fuel 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is drilled in 8x170, which is the native bolt pattern for Ford Super Duty trucks in the F-250 and F-350 range. The -18 offset and 10-inch width are designed to push the wheel face outboard, so you'll want to verify your wheel well clearance — especially if you're running a leveling kit or a full lift. We can confirm fitment specifics when you bring your truck in or call us with your year, make, model, and suspension setup.

Do lug nuts come included?

Lug nuts are not included with the wheel. Ford Super Duty applications typically require a specific seat type and thread pitch, so it's important to match the lug nut to both the wheel's seat and your factory stud. We stock the correct hardware and can make sure you leave with everything you need to mount safely.

Fitment specs: the Fuel 1PC D713 RAGE PLATINUM comes in 8x170 bolt pattern, ET-18 offset, 4.79" backspacing, 125.10mm hub bore, a 3700 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button