DUB 1PC S267 DIRTY DOG 6x135/6x139.7 Gloss Blk Milled Wheels

Back to Results

DUB 1PC S267 DIRTY DOG — Glossy Black Milled

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

When you hold the Dirty Dog face-up, the first thing you notice is the chunky spoke structure — thick, directional arms that taper toward the barrel without feeling busy. The milled pockets cut into the glossy black face create a two-tone contrast that reads well from a distance and up close. Under direct sunlight, the raw milled surfaces catch and scatter light while the gloss sections stay deep and dark, giving the wheel a dynamic look as the truck moves. It pairs naturally with black, white, silver, and dark earth tones — essentially any full-size body color where you want the wheel to anchor the build rather than compete with it. Tahoes, Silverados, Tundras, and Armadas all work well in this diameter range.

Specifications

Diameter x Width	24" x 10"
Bolt Pattern	6x139.7
Offset	ET+25mm
Backspacing	6.48"
Hub Bore	106.10mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	GLOSSY BLACK MILLED
Manufacturer Part Number	S267240084+25

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 6x139.7 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+25mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the GLOSSY BLACK MILLED Finish

DUB has been producing large-diameter wheels for the custom truck and SUV market since the late 1990s. The 1PC designation means the wheel is a single-piece cast construction — straightforward to balance, widely supported by tire shops, and easier to repair than multi-piece assemblies. They built their catalog around the 22-to-26-inch segment and that focus shows in the fitment data and finish consistency across their lineup.

About DUB 1PC

DUB 1PC produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is spec'd at 24x10 with a 25mm offset on a 6x139.7 bolt pattern, which covers a wide range of full-size GM, Toyota, and Nissan truck and SUV platforms. That said, you should always verify your specific year and trim against a fitment guide before ordering — hub bore, brake caliper clearance, and suspension lift height all factor into whether a 24-inch wheel clears cleanly on your exact build.

Do lug nuts come included?

Lug nuts are not included with the wheel. Most factory lug nuts are not compatible with aftermarket wheels due to differences in seat type and shank length, so plan to purchase a matching set separately. Bring your bolt pattern and seat type info when you order — our team can point you toward the correct spec.

Fitment specs: the DUB 1PC S267 DIRTY DOG comes in 6x139.7 bolt pattern, ET+25 offset, 6.48" backspacing, 106.10mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button