Black Rhino BULLHEAD 6x139.7 Black Wheels

Back to Results

Black Rhino Hard Alloys BULLHEAD — Black

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick up a Bullhead and the first thing you notice is how solid the face feels — this isn't a thin-spoke show wheel. The design runs a tight cluster of angular spokes that radiate outward from a deep-set center, giving the face a layered, almost armored look. In Black, the finish absorbs direct sunlight rather than bouncing it back, which keeps the wheel looking intentional rather than flashy. That low-key aggression pairs well with dark body colors like Magnetic Gray or Tuxedo Black, but it also reads cleanly against white and silver trucks where you want contrast without chrome. Fits naturally on Tacomas, 4Runners, Tundras, Silverados, Sierras, and similar platforms.

Specifications

Diameter x Width	20" x 9.5"
Bolt Pattern	6x139.7
Offset	ET+12mm
Backspacing	5.72"
Hub Bore	112.10mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	BLACK
Manufacturer Part Number	2095BLH126140M12

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 6x139.7 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET+12mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the BLACK Finish

Black Rhino Hard Alloys focuses almost exclusively on truck and off-road fitments, which shows in how they spec their load ratings and offset ranges. They're not trying to cover every segment — the lineup is narrower than some competitors, but the engineering decisions reflect actual off-road use cases rather than just aesthetics. Cast construction keeps the price accessible while still meeting DOT standards for on-road use.

About Black Rhino Hard Alloys

Black Rhino Hard Alloys produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is spec'd at 20x9.5 with a 12mm offset and a 6x139.7 bolt pattern, which covers a wide range of full-size and mid-size trucks. That said, offset and backspacing interact with your specific suspension and body setup, so confirm clearance — especially if you're running a lift kit or aftermarket control arms.

Do lug nuts come included?

Lug nuts are not included with the wheel. Most trucks running a 6x139.7 pattern use a 14x1.5 thread pitch, but verify your vehicle's seat type (conical, ball, or mag) before ordering hardware — the wrong seat angle is one of the most common installation mistakes we see.

Fitment specs: the Black Rhino Hard Alloys BULLHEAD comes in 6x139.7 bolt pattern, ET+12 offset, 5.72" backspacing, 112.10mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button