Asanti Off Road AB816 ANVIL 6x139.7 Gloss Blk Milled Wheels

Back to Results

Asanti Off Road AB816 ANVIL — Gloss Black Milled

Finding wheels that fit your vehicle

Fits your vehicle · Bolt — · Hub — Change Vehicle

FREESHIPPING

FITMENTGUARANTEED

PRO INSTALLAVAILABLE

Per wheel —

Set of 4 —

Ways to pay

Quantity

Call to check availability

Installed by Road Runner Wheels & Tires — family-owned in Marietta since 2010. Questions? Call (678) 400-6467.

About This Wheel

Pick up an AB816 Anvil and the face profile does the talking before you even look at the specs. The multi-spoke layout is chunky where it needs to be — the spokes carry real visual weight — and the milled pockets cut between them create depth that flat machined finishes rarely achieve. Gloss Black Milled means the base coat stays dark and rich while the machined edges catch ambient light at different angles, so the wheel reads differently parked in the sun versus sitting under a shop light. It works particularly well against white, silver, and satin gray body colors, though it holds its own on blacked-out builds too. This is a wheel aimed squarely at half-ton and three-quarter-ton applications — Silverado, Sierra, Tundra, F-150, Titan — where a wide 10-inch barrel and aggressive offset make a visible difference in overall presence.

Specifications

Diameter x Width	20" x 10"
Bolt Pattern	6x139.7
Offset	ET-18mm
Backspacing	4.79"
Hub Bore	106.10mm
Load Rating	2500 lbs
Construction	Cast
Material	Aluminum alloy
Finish	GLOSS BLACK MILLED
Manufacturer Part Number	AB816-201068GB18N

Build Your Package

Add Matching Tires

Brand Tire size Sort by

Loading matching tires from our catalog…

How it works

1 Call 678-400-6467 to confirm fitment & availability
2 Apply above or choose your financing option at checkout
3 Get approved instantly — no delay

678-400-6467 · Marietta, GA · Hablamos Español

Fitment

This wheel runs the 6x139.7 bolt pattern, which covers a range of half-ton trucks and SUVs depending on hub bore and offset. ET-18mm offset is typical for stock-height fitments; leveled and lifted trucks may want different offset/backspacing combinations to clear larger tires. A hub-centric ring is recommended when the wheel hub bore is larger than the vehicle hub.

About the GLOSS BLACK MILLED Finish

Asanti Off Road is the truck-focused arm of the broader Asanti brand, which has been producing custom wheels for over two decades. The Off Road line concentrates on aggressive fitments and durable cast construction rather than luxury-market aesthetics. The AB816 Anvil sits in their core lineup — a consistently stocked model rather than a limited run — which matters when you need to replace a curbed wheel down the road.

About Asanti Off Road

Asanti Off Road produces wheels distributed nationally through trusted vendor channels. Catalogs are stocked, MAP-pricing is enforced, and warranty coverage is honored at the manufacturer level.

Installing at Road Runner Wheels & Tires

Mount and balance is same-day in most cases in our shop. We program TPMS sensors on-site and pair wheels with matching tires when needed. Same shop handles lift kits, suspension work, and full builds.

Questions We Get

Will this fit my truck?

This wheel is spec'd at 20x10 with a 6x139.7 bolt pattern and a -18mm offset, which covers a wide range of full-size trucks including Chevrolet Silverado 1500, GMC Sierra 1500, Toyota Tundra, and Nissan Titan in certain model years. That said, offset and backspacing interact with your specific suspension, leveling kit, and fender clearance, so confirm fitment against your exact year and trim before ordering. Our fitment team can cross-reference your vehicle against these specs if you have questions.

Do lug nuts come included?

Lug nuts are not included with this wheel. The seat type — typically a conical or mag seat — needs to match both the wheel and your vehicle's factory studs, so we sell hardware separately to make sure you get the correct spec. We can identify the right lug nuts for your application when you order.

Fitment specs: the Asanti Off Road AB816 ANVIL comes in 6x139.7 bolt pattern, ET-18 offset, 4.79" backspacing, 106.10mm hub bore, a 2500 lbs load rating.

Looking for wheels, rims & tires near you in the Atlanta metro? We mount + balance same day at our Marietta tire shop — 1585 Roswell Rd. Serving Marietta, Atlanta, Cobb County, Kennesaw, Smyrna, Sandy Springs, Roswell, Alpharetta, Buckhead + Vinings.

You can compare up to 5 wheels.

Compare 0 of 5Tap a wheel's Compare button