4 Inch Lift Kit w/ Radius Arm | Ford Bronco (80-96) 4WD

Built for Bronco owners who want more clearance and control without sacrificing ride quality, this 4-inch lift kit raises your 1980–1996 Ford Bronco full-size 4WD while keeping the steering responsive and predictable. Extended radius arms preserve caster geometry as you articulate, so you get 33-inch tire clearance and a truck that actually drives like it should — not a truck that fights you at every turn.

Installed and serviced at Road Runner Wheels & Tires. Most kits go in the same day. Call (678) 400-6467 to schedule.

What you get up front

• Pro-Ride Coil Springs — A matched pair tuned for 4 inches of lift. They deliver consistent spring rate across terrain so your Bronco doesn't dive or float.
• Extended Radius Arms — High-strength tubular arms replace the factory stamped steel. They're engineered longer to reduce caster change through the full range of wheel travel.
• Axle Pivot Relocation Brackets — Repositions the front axle to work with the extended arms and maintain driveline geometry.
• Forged Pitman Arm — Corrects steering angles so your truck responds predictably on road and trail.
• NX2 Nitro Shocks (front) — Nitrogen-charged dampers tuned to match the Pro-Ride springs for controlled, repeatable suspension action.

Out back

The rear gets a high-strength lift block, longer u-bolts, and a matching set of NX2 Nitro shocks. You can choose the base Block Kit, add a second leaf spring for extra load capacity with the Block Kit and Add-A-Leaf, or swap to a full replacement Leaf Spring set — each option stacks 4 to 5.5 inches of height depending on load.

Important notes

• This kit supports up to 33 x 12.5 tire maximum. Larger tires will rub and accelerate wear on suspension components.
• Extended radius arms are necessary for geometry correction. Using factory arms will cause excessive caster loss and steering instability.
• Driveshaft angle is recalibrated by the axle relocation brackets — this is not a simple block lift.

Why customers pick this at Road Runner

• BDS Suspension warranty is honored in-house — no shipping parts back or waiting weeks.
• Our techs install these kits every week; we know every quirk of the Bronco platform.
• Extended radius arms set us apart from cheap block-only lifts — you get true geometry correction, not a bandage.
• Pro-Ride springs are tuned for the Bronco's weight and driveline — not generic off-the-shelf units.
• Single-day install keeps your truck off the lift and back in the dirt.

Ready to build it? Call (678) 400-6467. Hablamos Español.