Volkswagen Cabrio Wheels
Fitment by Year
OE Volkswagen Cabrio wheels run 14 to 18 inches on a 4x100 bolt pattern with a 57.1mm hub bore—1995 through 2003 models all share that spec. I've mounted hundreds of these over the years, and the key thing I learned early is that hub-centric fitment matters on a Cabrio more than folks think. The spigot ring centering the wheel on that 57.1mm bore keeps the whole setup balanced and stable, especially if you're running anything plus-size.
We stock OE-style replacements in 14, 15, and 16-inch sizes—gloss black, silver, and machined finishes—but I also keep a solid selection of 17 and 18-inch upgrade options in stock. If you want to go wider, offset becomes the conversation. Most folks upgrading a Cabrio are looking for a more planted stance without rubbing the fender, so I typically recommend a slight negative offset to pull the wheel out just enough. We'll run the math before you leave the shop so there's no surprise when you drive out.
Mounting and balancing—I run road-force on every one. My crew checks hub-centric fit, seats the TPMS sensor clean, codes the new tire pressure into your car's system, and torques the lugs to Volkswagen spec. We've been doing this in Marietta for fifteen years, and it's still the same careful work. Walk-ins welcome, bilingual shop, and we handle the install in-house start to finish.
We mount wheels for folks around Marietta, Roswell, Kennesaw, and across Atlanta. Financing runs through Synchrony on orders $199 and up, or Acima lease-to-own if that works better. Call (678) 400-6467, walk in at 1585 Roswell Rd, or book online.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Volkswagen Cabrio
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Volkswagen Cabrio wheels
What's the bolt pattern on a 1995–2003 Volkswagen Cabrio?
4x100. Hub bore is 57.1mm. I keep spigot rings in stock because getting that hub-centric fit right is what separates a smooth ride from a vibration complaint.
Will 18-inch wheels fit my Cabrio without rubbing?
Yes, but offset matters. On an 18-inch rim, I usually recommend something in the -15 to 0 range depending on your brake setup and fender clearance. We measure before you buy so there's no guessing.
Do you install wheels same-day?
Most of the time, yeah. Drop off your car or walk in with your wheels and we'll mount, balance, TPMS-code, and torque everything to spec. Call ahead if it's a Saturday and we're slammed.
Can I finance wheels at Road Runner?
Synchrony Car Care for 6 months zero interest on $199 and up, or Acima lease-to-own starting at $10. We can run both right here.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Cabrio without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.