Toyota MR2 Wheels
Fitment by Year
OE size on a 2000–2005 MR2 runs 15 to 17 inches, 4x100 bolt pattern, 54.10mm hub bore. I see a lot of these come through — they're fun cars, and folks usually want to upgrade from the stock setup without breaking the bank. We keep a solid rotation of sizes on the rack that fit that platform dead-center.
When you're shopping for a wheel, you've got two lanes: stick with an OE-style replacement in the same diameter range, or go plus-size if you want a wider, lower look. The 4x100 pattern is straightforward, and the 54.10 hub bore means we can run hub-centric rings to keep everything locked in tight. Offset matters on an MR2 — you're dealing with a narrow track, so I usually recommend staying between +35 and +45 to avoid rubbing or sticking out past the fender. Gloss black, machined aluminum, bronze — we stock finishes that work with the car's lines without looking forced.
Once you pick a wheel, my crew handles the full install in-house. We check hub-centric fit, seat the spigot rings, pull and re-code the TPMS sensors, run road-force balance on every one, and torque the lugs to Toyota spec. Bilingual crew, walk-ins welcome — we've been doing this in Marietta for fifteen years, and we don't rush the work. You're not going to a call center; I'm here answering the phone and overseeing every job.
We mount wheels for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta side. If you want to spread the cost, we offer financing through Synchrony (6-month promo on $199 and up) and lease-to-own through Acima starting at $10. Walk in, call 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Toyota MR2
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Toyota MR2 wheels
What's the bolt pattern on a 2000–2005 Toyota MR2?
It's 4x100, 54.10mm hub bore. Straightforward fitment. I've got a bunch of options that sit right on that pattern without adapters or spacers.
Can I fit 17-inch wheels on my MR2?
Yeah, OE goes up to 17 inches on some years. Just watch your offset — stay around +35 to +45 so you don't rub the fender or stick out past the body line. I'll dial it in when you come in.
Do you install wheels same-day?
Most of the time, yes. Depends on how busy we are and what you're bringing in, but I keep my crew moving. Call ahead if you want to lock in a time slot.
Can I finance wheels at Road Runner?
We work with Synchrony Car Care (6-month promo on purchases $199 and up) and Acima lease-to-own starting at $10. No call center, no waiting — we handle it right here.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your MR2 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.