Toyota Matrix Wheels
Fitment by Year
I see a lot of these 2003–2013 Matrix models come through, and they're straightforward to dial in. OE sizes run 205/55-16 or 215/45-17 depending on the year, sitting on a 5x100 or 5x114.3 bolt pattern with a 54.10 mm hub bore. Once you know which generation you've got, fitment's locked down.
We stock OE-style replacements in those sizes — gloss black, machined, bronze finishes — plus a few plus-size options if you want to go 18 or 19 inch. The trick is offset and brake clearance; I keep both in mind when we're picking what goes on your car. Most Matrix owners I talk to run somewhere between a 35 and 50 mm offset, and we make sure the wheel clears the caliper before we touch anything.
Once you've chosen, my crew runs a hub-centric fit check, seats the TPMS sensors, road-force balances every wheel, and torques the lugs to Toyota spec. We're bilingual, walk-ins are fine, and we've been doing this in Marietta for fifteen years — it's just how we work. You're not waiting on a call center or a franchise checklist; I'm here, my team's here, and we get it right the first time.
We mount these for folks across Marietta, East Cobb, and the broader Atlanta side. Financing through Synchrony on purchases over $199, or lease-to-own through Acima starting at $10. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Toyota Matrix
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Toyota Matrix wheels
What's the bolt pattern on a Toyota Matrix?
Depends on the year. Earlier models (2003–2007) are typically 5x100, and later ones (2008–2013) run 5x114.3. I always confirm the year first so we grab the right wheel.
Will these wheels fit my Matrix?
As long as you know your year and the OE rim diameter you're starting with — 16, 17, 18, or 19 inch — we can match it. Hub bore is 54.10 mm across the board, so that's never the hold-up.
Do you install wheels same-day?
Most of the time, yes. I run road-force balance on every one, check the hub-centric fit, reseat the TPMS, and torque to spec. Depends on how busy we are, but walk-ins usually get out the same day.
Can I finance wheels at Road Runner?
Yeah. Synchrony Car Care on purchases over $199 — six-month promo financing — or Acima lease-to-own starting at $10. No credit card needed for Acima.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Matrix without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.