Toyota Grand Highlander Wheels
Fitment by Year
OE on a 2024–2027 Grand Highlander runs 18 or 20 inches, 5x114.3 bolt pattern, 60.1mm hub bore — and I keep both sizes in stock here at the shop. The jump from the smaller 18-inch setup to a 20-inch upgrade is something I see folks curious about a lot, especially since that Grand Highlander sits tall and carries real weight, so the rim choice matters more than people think.
We stock OE-style replacements in gloss black, machined, and bronze finishes, and we also carry plus-size options if you want to step up from the factory diameter. Offset and brake clearance are key here — I usually run 35 to 45mm offset depending on the finish and width you pick, and the 20-inch wheels need a little extra attention because that three-piston setup on the front can get tight. I'll measure your current wheel before we order anything to make sure you're not eating brake dust or rubbing.
Once they're here, my crew runs each wheel hub-centric on the vehicle, seats the TPMS sensors fresh, road-force balances every one, and torques the lugs to Toyota spec. Been doing these for a while now — the Grand Highlander's a newer platform, but it's been solid work. We're bilingual in the shop, walk-ins are always welcome, and we handle everything in-house.
We mount these for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta area. We offer lease-to-own through Acima if you want to start with ten bucks, and Synchrony financing runs six months promo on purchases over $199. Walk in at 1585 Roswell Rd, call me at 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Toyota Grand Highlander
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Toyota Grand Highlander
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Toyota Grand Highlander wheels
What's the bolt pattern on a 2024–2027 Toyota Grand Highlander?
5x114.3. That's five lugs, 114.3mm center-to-center. Hub bore is 60.1mm. If you're shopping online, that's the number you need to punch in.
Will 20-inch wheels fit my Grand Highlander?
Yes — OE goes up to 20 inches on these. Just watch your offset if you're going plus-size; I usually run 35 to 45mm depending on width and finish, and the front brakes need clearance. I'll check it before we order.
Do you do same-day wheel installation?
Most of the time, yeah. If I have the wheels in stock and you bring it in before noon, we can get you out the same day. If we're ordering them, we'll mount and balance as soon as they land. Call ahead so I know you're coming.
Can I finance wheels at Road Runner?
Two ways — Synchrony Car Care gives you six months promo on $199 and up, or Acima lease-to-own starts at ten bucks down. Both are quick, and we handle it in the shop.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Grand Highlander without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.