Toyota Crown Wheels
Fitment by Year
The 2023–2027 Toyota Crown rolls on a 5x114.3 bolt pattern with a 60.1mm hub bore, and I keep 19- to 21-inch fitments in stock because these sedans come through the bay pretty steady. OE size is 225/55-19, but I've had plenty of Crown owners looking to go plus-size or swap to a different finish without losing that hub-centric fit.
For replacements, I stock OE-spec 19-inchers in gloss black and machined finishes, and we can go 20 or 21 inches if you want more presence on the road. Offset usually sits around 35mm to 45mm depending on the wheel — I check brake clearance on everything before it leaves the bay. Hub bore is tight at 60.1mm, so I always use a spigot ring to keep the wheel seated square on the hub. Bronze, gunmetal, and satin black are popular upgrades I can source, and I'll match any fitment spec you're after.
When your Crown comes in, I run road-force balance on every wheel, reseat and re-code the TPMS sensors, and torque the lugs to Toyota spec — usually 76 foot-pounds. My crew checks hub-centric fit by hand before you drive off. Been doing this in Marietta for fifteen years now, bilingual shop, and we handle every install in-house. Walk-ins are welcome, no appointment needed.
We mount these for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta area. Financing through Synchrony (6-month promo on $199 and up) or lease-to-own through Acima ($50 to start). Call (678) 400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Toyota Crown
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Toyota Crown
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Toyota Crown wheels
What's the bolt pattern on a 2023–2027 Toyota Crown?
5x114.3 with a 60.1mm hub bore. That's a pretty common pattern, and I keep Crown fitments on the rack. Make sure whoever installs your wheels uses a spigot ring — the hub bore is tight, and I don't cut corners on that.
Will these wheels fit my Toyota Crown?
If they're 5x114.3 and the offset is between 35mm and 50mm, they'll fit. I always check brake clearance, especially if you're going 20 or 21 inches. Bring your Crown by and I'll verify fitment in person.
Do you install wheels same-day?
Yeah, most of the time. If you come in before 4 p.m. and we're not slammed, I can have you road-force balanced and out the door in under an hour. Call ahead if you want to be sure — (678) 400-6467.
Can I finance wheels at Road Runner?
Absolutely. Synchrony Car Care runs a 6-month promo on purchases $199 and up, and Acima lets you lease-to-own starting at $10. Both are quick to approve, and I can walk you through the paperwork.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Crown without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.