Toyota Avalon Wheels

I've had Avalons roll through here for years — everything from '95 models to the latest generation. OE size runs 235/45-18 or 215/55-17 depending on trim, 5x114.3 bolt pattern, 60.10mm hub bore. The Avalon's a different animal than what most folks think — it's built to handle, not just cruise. That means the wheel fitment matters more than people realize.

We keep 17, 18, 19, and 20-inch rims on the rack for your Avalon. You can go OE-style replacement — same diameter, same offset — or step up a size if you want a sportier look and don't mind a slight ride-quality trade-off. I usually stock gloss black, machined, and bronze finishes. Offset is critical here; most Avalons run +45 to +50 depending on generation, and I check brake clearance on every fitment because the suspension geometry changes year to year. Hub bore is 60.10mm, so we use spigot rings to center the wheel on the hub instead of relying on lug nuts alone.

When your Avalon comes in, I run road-force balance on every one, reseat and re-code the TPMS sensors, and torque the lugs to spec. We've been doing this in-house for fifteen years right here in Marietta, and I handle the install myself or my crew does — no outsourcing. We're bilingual, walk-ins are welcome, and if you need financing, we've got Synchrony (6 months on $199 and up) and Acima ($50 to start) both available.

We mount these for folks across Marietta, East Cobb, and Roswell. Call me at (678) 400-6467, walk in at 1585 Roswell Rd, or book online below.