Scion IM Wheels
Fitment by Year
The 2016 Scion IM rolls on a 5x114.3 bolt pattern with a 60.10mm hub bore, and I keep both OE-style 17-inch replacements and plus-size upgrades in stock. Most of these come in with 225/45-17 as the factory size, but there's room to go wider and taller if you want that sportier stance.
I can fit you with anything from a straight 17-inch replacement up to a 19-inch wheel, depending on what look you're after and your brake clearance. We stock gloss black, machined finishes, and bronze options—all hub-centric with proper spigot rings for that tight fit. Offset matters on these cars; I usually run between 35 and 45mm to keep the wheel tucked and safe from rubbing, but I'll measure your setup first to dial it in.
Once we mount your wheels, my crew runs a road-force balance on every one, resets and codes your TPMS sensors, and torques the lugs to spec. I've been doing this in Marietta for fifteen years with my family, and we handle every install in-house—no outsourcing, no guessing. Walk-ins are always welcome, and we're bilingual if that matters.
We mount wheels for folks across Marietta, East Cobb, and Roswell. If you want to finance, we've got Synchrony Car Care (6-month promo on $199 and up) and Acima lease-to-own starting at $10. Call me at (678) 400-6467, swing by 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Scion IM
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Scion IM
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Scion IM wheels
What's the bolt pattern on a 2016 Scion IM?
It's 5x114.3 with a 60.10mm hub bore. That's the measurement I need to make sure any wheel you pick will fit tight and safe. I've got hubs and spigot rings on hand to dial it in.
Can I fit 19-inch wheels on my Scion IM?
Yeah, you can go up to 19-inch. I'll check your brake clearance first and make sure the offset doesn't rub the fender or suspension. Most folks run 35 to 45mm offset on these cars and it works great.
Do you install wheels same-day?
Most of the time, yes. I mount, balance on road-force, reset your TPMS, and torque everything to spec in-house. If you call ahead, I can tell you exactly how long you'll wait. Walk-ins are fine too.
Can I finance wheels at Road Runner?
Absolutely. Synchrony Car Care gives you 6 months with no interest on purchases $199 and up. Acima lease-to-own starts at $10 down. Call (678) 400-6467 or ask when you visit.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your IM without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.