Ram PRO Wheels
Fitment by Year
OE size on a RAM PRO is 16 inches, 5x130 bolt pattern, 78.20mm hub bore. I've had a lot of these trucks roll in over the years—2014 through 2023—and the fitment's straightforward once you know what you're working with. We keep 16-inch options on the rack, everything from OE-style replacements to plus-size upgrades if you want a little more sidewall or a different look.
When you're shopping for wheels on your PRO, you've got options. Gloss black, machined finishes, bronze—whatever matches your taste. The offset and brake clearance matter here, especially if you're running a heavier tire or planning to lift. I always check the spigot ring fit and make sure the hub-centric seat is dead-on before anything leaves the shop. The 5x130 pattern is common enough that we've got good inventory, but I'll always confirm your year and current setup when you call or walk in.
Once you pick your wheels, my crew handles everything in-house. We road-force balance every set, reseat and re-code the TPMS sensors, torque the lugs to spec, and check the fit. Been doing this for fifteen years right here in Marietta, and it shows in the details. We're bilingual, walk-ins are always welcome, and we answer the phone ourselves—no call center.
We mount these for folks across Marietta and the surrounding areas. If you need financing, we've got Synchrony Car Care (6-month promo on purchases $199 and up) and Acima lease-to-own ($50 to start). Call us at 678-400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ram PRO
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Ram PRO wheels
What's the bolt pattern on a RAM PRO?
5x130. That's five lugs, 130mm spacing. Hub bore is 78.20mm. I always verify your year and trim when you come in, just to be sure, but that pattern holds across the 2014–2023 range we see most.
Will these wheels fit my RAM PRO?
If your truck is a 2014 or newer PRO, 16-inch wheels on a 5x130 pattern will fit. We double-check offset and brake clearance depending on your current setup and any suspension changes you've made. Bring your truck by or text a photo of your current wheel, and I'll confirm fitment in two minutes.
Do you install wheels same-day?
Most of the time, yes. We mount, balance, and TPMS reseat in-house. If you're coming in with a set you already own, call ahead so we know you're coming. Walk-ins are fine too.
Can I finance wheels?
Yeah. Synchrony Car Care gives you 6 months no interest on orders $199 and up. Acima is another option if you prefer lease-to-own—starts at $50. We handle the paperwork right here.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your PRO without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.